RM 3.6K
Transmission Authorization Certification (132/275/500kV)

Transmission Authorization Certification (132/275/500kV)
Transmission

Overview:

This is a preparation course to convert from CP to authorize person. The subject covered such as:

Safety and Working Clearance, transmission electrical safety rules, electricity act 1990 (act 447), direct contact, indirect contact, touch voltage, step voltage.

The diffrence between safet y/ section clearance and working Clearance as per TNB Safety Rule, Ground clearance (outside subtation, such as road crossing), minimum clearance ,clarify the terms, eg: basic electrical clearance, working clearance for overhead line, barriers and roping arrangement for area of work.

The understanding primary equipment & interlock – focus on case study, function, rating, and operation issue, operational procedure which is related to switching - (Live and Non Live) and etc.

Others are management instruction, switching check list (Live Transfer), PTW issuance, Preliminary check at switchyard & Control room (kV, A, MW).

 



Objective:
After attending this course:

• Participants will be able to apply safety and working clearance following Electrical Safety Rules & Act.
• Participant will be able to explain Permit to Work issuance and Work Authorization procedure.
• Participants will be able to describe Single Line Diagram, Auth. & Switching Procedure correctly.


for any enquiries please contact:

1. NAME: AHMAD MAHMOOD
   Email: ahmadm@tnb.com.my

2. NAME: MOHD SALIM NGADINO
   Email: salimn@tnb.com.my
 

Duration: 5 Days


Request Form





Available Sessions

Upon Request


Other Information
Target Participant: Live Substation Unit


Price

Upon Request



Related Course

RM 3.6K
Understanding Power System Dynamics And Wide Area Restoration Of Supply
Transmission

3 Days

View Details

Overview:

This is a preparation course to convert from CP to authorize person. The subject covered such as:

Safety and Working Clearance, transmission electrical safety rules, electricity act 1990 (act 447), direct contact, indirect contact, touch voltage, step voltage.

The diffrence between safet y/ section clearance and working Clearance as per TNB Safety Rule, Ground clearance (outside subtation, such as road crossing), minimum clearance ,clarify the terms, eg: basic electrical clearance, working clearance for overhead line, barriers and roping arrangement for area of work.

The understanding primary equipment & interlock – focus on case study, function, rating, and operation issue, operational procedure which is related to switching - (Live and Non Live) and etc.

Others are management instruction, switching check list (Live Transfer), PTW issuance, Preliminary check at switchyard & Control room (kV, A, MW).

 


Objective:
After attending this course:

• Participants will be able to apply safety and working clearance following Electrical Safety Rules & Act.
• Participant will be able to explain Permit to Work issuance and Work Authorization procedure.
• Participants will be able to describe Single Line Diagram, Auth. & Switching Procedure correctly.


for any enquiries please contact:

1. NAME: AHMAD MAHMOOD
   Email: ahmadm@tnb.com.my

2. NAME: MOHD SALIM NGADINO
   Email: salimn@tnb.com.my
 

Target Participant: Live Substation Unit
Duration: 5 Days
Language:

RM 3.6K
Transmission Planning And Grid System
Transmission

3 Days

View Details

Overview:

This is a preparation course to convert from CP to authorize person. The subject covered such as:

Safety and Working Clearance, transmission electrical safety rules, electricity act 1990 (act 447), direct contact, indirect contact, touch voltage, step voltage.

The diffrence between safet y/ section clearance and working Clearance as per TNB Safety Rule, Ground clearance (outside subtation, such as road crossing), minimum clearance ,clarify the terms, eg: basic electrical clearance, working clearance for overhead line, barriers and roping arrangement for area of work.

The understanding primary equipment & interlock – focus on case study, function, rating, and operation issue, operational procedure which is related to switching - (Live and Non Live) and etc.

Others are management instruction, switching check list (Live Transfer), PTW issuance, Preliminary check at switchyard & Control room (kV, A, MW).

 


Objective:
After attending this course:

• Participants will be able to apply safety and working clearance following Electrical Safety Rules & Act.
• Participant will be able to explain Permit to Work issuance and Work Authorization procedure.
• Participants will be able to describe Single Line Diagram, Auth. & Switching Procedure correctly.


for any enquiries please contact:

1. NAME: AHMAD MAHMOOD
   Email: ahmadm@tnb.com.my

2. NAME: MOHD SALIM NGADINO
   Email: salimn@tnb.com.my
 

Target Participant: Live Substation Unit
Duration: 5 Days
Language:

RM 3.6K
On Load Tap Charger (OLTC): Fundamental Operation And Maintenance For Technician
Transmission

4 Days

View Details

Overview:

This is a preparation course to convert from CP to authorize person. The subject covered such as:

Safety and Working Clearance, transmission electrical safety rules, electricity act 1990 (act 447), direct contact, indirect contact, touch voltage, step voltage.

The diffrence between safet y/ section clearance and working Clearance as per TNB Safety Rule, Ground clearance (outside subtation, such as road crossing), minimum clearance ,clarify the terms, eg: basic electrical clearance, working clearance for overhead line, barriers and roping arrangement for area of work.

The understanding primary equipment & interlock – focus on case study, function, rating, and operation issue, operational procedure which is related to switching - (Live and Non Live) and etc.

Others are management instruction, switching check list (Live Transfer), PTW issuance, Preliminary check at switchyard & Control room (kV, A, MW).

 


Objective:
After attending this course:

• Participants will be able to apply safety and working clearance following Electrical Safety Rules & Act.
• Participant will be able to explain Permit to Work issuance and Work Authorization procedure.
• Participants will be able to describe Single Line Diagram, Auth. & Switching Procedure correctly.


for any enquiries please contact:

1. NAME: AHMAD MAHMOOD
   Email: ahmadm@tnb.com.my

2. NAME: MOHD SALIM NGADINO
   Email: salimn@tnb.com.my
 

Target Participant: Live Substation Unit
Duration: 5 Days
Language:

Human Resource Minister - Training Provider Award 2007
Role Model Company 2013 for Electrical Training Programmes by Manpower Department (JTM)
Energy Industry Award: Training Institution Excellence 2011

TNB Integrated Learning Solution Sdn Bhd - ILSAS
Jalan IKRAM-UNITEN, Karung Berkunci 205,
43650 Bandar Baru Bangi, Selangor, MALAYSIA

T: (+6) 03-8922 7222 F: (+6) 03-8926 4437 E: infoilsas@tnb.com.my

© 2017 TNB ILSAS