Power & Energy

RM 3.6K
Renewable Energy - Payment Advice
Power & Energy

2 Days

View Details

Overview:
The course is design to educate participants on Renewable Energy Meters characters including the wiring of the meters and identification of faulty Renewable Energy Meters. On the payment advice activities, participants will be using TNB e-CIBS system which includes invoice verification process.

“Learning by doing” is a basic principle adopted in this training. Participant will be taken through the vast experience of training by the trainers. The emphasis is on participants continuing participation in ensuring the ultimate success of the course.
Objective:
Upon completion of this course, participants will be able to:

• Read Renewable Energy Meter without mistakes.
• Generated payment advice precisely in the TNB e-CIBS system
• Verify payment advice in the TNB e-CIBS system
• Identify faulty Renewable Energy Meter correctly


for any enquiries please contact:

1. NAME: IR. WAN AMINUDDIN BAKI BIN ABDUL KHALID
   Email: aminuddinak@tnb.com.my

2. NAME: ANNAS BIN AHMAD SALLEH
   Email: annass@tnb.com.my

Target Participant: Meter Reader Inspection, Meter Reader Examiner, Meter Reader, TNBD Large Power Consumer Clerk & TNBD Customer Service Executive
Duration: 2 Days
Language:

RM 3.6K
Renewable Energy Project - Meter Reading and Invoice…
Power & Energy

New

View Details

Overview:

Objective:


Target Participant: Exec/Non Exec TNBD
Duration: New
Language:

RM 3.6K
Renewable Energy Project - New Connection
Power & Energy

2 Days

View Details

Overview:
This course is conduct using TNB e-CIBS system. It’s consisting of seven stages which to be completed by the participants. Participants will be experience completing the RE New Connection application steps by steps to the end of the process of finalizing the application.

“Learning by doing” is a basic principle adopted in this training. Participant will be taken through the vast experience of training by the trainers. The emphasis is on participants continuing participation in ensuring the ultimate success of the course.
 
Objective:
Upon completion of this course, participants will be able to:

• Identify and execute roles for each stage of new connection without mistakes
• To key in related data in eCIBS system based on relevant documents
• To key in and calculate tariff adjustment and average consumption in e-CIBS system based on relevant documents
• To verify, confirm and approve data entered correctly in eCIBS system based on relevant documents
• To fill in the mandatory field and complete Work Order 11 in eCIBS system based on relevant documents


for any enquiries please contact:

1. NAME: IR. WAN AMINUDDIN BAKI BIN ABDUL KHALID
   Email: aminuddinak@tnb.com.my
    
2. NAME   ANNAS BIN AHMAD SALLEH
   Email: annass@tnb.com.my
 

Target Participant: Chief Clerk, Ordinary Power Consumer Clerk, Large Power Consumer Clerk & Customer Service Executive
Duration: 2 Days
Language:

RM 3.6K
Renewable Energy Project -Testing and Commissioning…
Power & Energy

New

View Details

Overview:

Objective:


Target Participant: Exec/Non Exec TNBD
Duration: New
Language:

RM 3.6K
Rotating Machinery Maintenance Works
Power & Energy

5 Days

View Details

Overview:
This course is a compressed and concise practical hands on related to rotating machinery in the power plants. Every individual topic is demonstrated by instructor via hands-on and practical of actual work. This course does not replace individual full courses which details calculation, actual theory, and skill developments set.

Shaft Alignment Technique Rim-Face and Reverse dial indicator Method is covered via alignment works on actual motor and pump.  Another hands on major work is aligning a large Turbine and Generator. This includes shaft but also topics on bearing alignment by piano wire & telescope is covered. 

Balancing works on Machine Shop is demonstrated for single plane and two plane motor rotor. Participants will get a little bit knowledge how unbalance is diagnosed via vibration analysis, and how balancing tolerance are graded.

Final topic is Basic Centering & Leveling vertical unit hydro turbine. Practical is using small scale on model Centering & Leveling.
 
Objective:
Upon completion of this workshop, participants will be:

• To understand the mechanical defects will change the operating conditions.
• To know the failure modes of rotating equipment.
• To diagnose machinery problem and root cause analysis for reliability.


for any enquiries please contact:

1. NAME: CHOOI WAI MUN
   Email: chooiwm@tnb.com.my

2. NAME: ABDUL RAZAK
   Email: razakm@tnb.com.my
 

Target Participant: TNBG Engineers in Mechanical Maintenance
Duration: 5 Days
Language:

RM 3.6K
Safe and Efficient Operation
Power & Energy

3 Days

View Details

Overview:
The course is to be run for maximum effectiveness, it is recommended that the course be run on per shift basis and the participants to comprise of Shift Charge Engineer, Supervisors, Operation Technicians and C&I Technicians on shift.

The reason for having the above category of participants together is due to the fact that they normally work as a team. As such, all the members of the team should be subjected to the same training so that they can talk in the same language when the need to analyze a problem on the plant arises.
Objective:
At the end of the course, the participants will be able to:

  • Minimize excess combustion air
  • Clean boiler heat transfer surface
  • Improve water treatment to minimize boiler blowdown
  • Minimize vented steam
  • Optimize condensate recovery

for any enquiries please contact:

1. NAME: IR. YEOH CHIEN WERN
   Email: yeohcw@tnb.com.my

2. NAME: MOHD KHAIRUL FIKRI BIN MOHD SALLEH
   Email: khairul.fikri@tnb.com.my

Target Participant: Process Technician, Boiler Operators & Maintenance, Mechanical Technicians, Supervisors, Utility Engineers & managers those who are interested in boiler operation and steam distribution
Duration: 3 Days
Language: English, Malay

RM 3.6K
Safety and Health in Power Plant - TT05
Power & Energy

4 Days

View Details

Overview:
The importance of safety in the work, health, and environment is utmost importance in today's industrial standards. Significance of safety is even more crucial with a large electric utility provider as TNB.

This course provides the basic safety knowledge with regard to common rules and legislations in Malaysia. Participants will also be given awareness of specific requirements working in the power plant environment such as safety protective equipment, fire safety, emergency responds, first aid, and a brief overview of TNB Generation Safety Signage.
 
Objective:
• Oblige Occupational Safety & Health Legislations
• Practice TNB Generation’s Safety Rules effectively
• Apply specific safety requirement for specific purpose
• Use and maintain personnel protective equipment
• Control and aware the fire risk, and immediately take properly action in fire rescue to safe life and properties
• Conduct Apply first aid during emergency
• Adhere “Appendix 4” TNB Generation Safety Signage


for any enquiries please contact:

1. NAME: CHOOI WAI MUN
   Email: chooiwm@tnb.com.my

2. NAME: ABDUL HISHAM
   Email: hishamab@tnb.com.my
 

Target Participant: TNBG Operation & Maintenance (TT05)
Duration: 4 Days
Language: English, Malay

RM 3.6K
Safety and Health in Power Plant - TT06
Power & Energy

3 Days

View Details

Overview:
The importance of safety in the work, health, and environment is utmost importance in today's industrial standards. Significance of safety is even more crucial with a large electric utility provider as TNB.

This course provides the basic safety knowledge with regard to common rules and legislations in Malaysia. Participants will also be given awareness of specific requirements working in the power plant environment such as safety protective equipment, fire safety, emergency responds, first aid, and a brief overview of TNB Generation Safety Signage.
 
Objective:
• Comply to Occupational Safety & Health Act 1994
• Identify provision and comply to Factories and Machinery 1967 (Act 139)
• Understand TNB Generation Safety Rules (Mechanical)
• Handle and work with chemical in high safety precaution 
• Recognize, evaluation and control in confined space
• Use and maintain personnel protective equipment
• Prevent and put off fire during fire incident


for any enquiries please contact:

1. NAME: CHOOI WAI MUN
   Email: chooiwm@tnb.com.my

2. NAME: ABDUL HISHAM
   Email: hishamab@tnb.com.my
 

Target Participant: TNBG Operation & Maintenance (TT06)
Duration: 3 Days
Language:

RM 3.6K
Safety and Health in Power Plant - TT07
Power & Energy

4 Days

View Details

Overview:
The importance of safety in the work, health, and environment is utmost importance in today's industrial standards. Significance of safety is even more crucial with a large electric utility provider as TNB.

This course provides the basic safety knowledge with regard to common rules and legislations in Malaysia. Participants will also be given awareness of specific requirements working in the power plant environment such as safety practice at project site, fire safety, secure industrial diseases, first aid, manage environmental issues, and a brief overview of TNBG’s Safety Rules (Mechanical and Electrical)
 
Objective:
• Oblige Occupational Safety & Health Legislations
• Practice Safety Regulation from the TNBG’s Safety Rules (Mechanical and Electrical)
• Execution safety practices throughout TNBG installations and ensure the safety of all personnel
• Prevent the fire risk, and immediate fire rescue
• Conduct and provide first aid during emergency, Secure various industrial diseases
• Manage and appreciate the environmental friendly


for any enquiries please contact:

1. NAME: CHOOI WAI MUN
   Email: chooiwm@tnb.com.my

2. NAME: ABDUL HISHAM
   Email: hishamab@tnb.com.my
 

Target Participant: TNBG Operation & Maintenance (TT07)
Duration: 4 Days
Language:

RM 3.6K
Safety and Health in Power Plant - TT09
Power & Energy

4 Days

View Details

Overview:
The importance of safety in the work, health, and environment is utmost importance in today's industrial standards. Significance of safety is even more crucial with a large electric utility provider as TNB.

This course provides the basic safety knowledge with regard to common rules and legislations in Malaysia. Participants will also be given awareness of specific requirements working in the power plant environment such as safety practice at project site, fire safety, first aid, and a brief overview of TNBG’s Safety Rules (Mechanical and Electrical).
 
Objective:
• Oblige Occupational Safety & Health Legislations
• Apply the Factories & Machinery Act 1967 at workplace effectively
• Apply the TNBG Safety Rules (Mechanical & Electrical) at workplace correctly
• State First aid and Cardio Pulmonary Resuscitation Procedures based on Malaysian Red Crescent requirement without fail
• Identify Fire Safety and Prevention methods correctly


for any enquiries please contact:

1. NAME: CHOOI WAI MUN
   Email: chooiwm@tnb.com.my

2. NAME: ABDUL HISHAM
   Email: hishamab@tnb.com.my
 

Target Participant: TNBG Operation & Maintenance (TT09)
Duration: 4 Days
Language:

RM 3.6K
Safety and Health in Power Plant - TT10
Power & Energy

3 Days

View Details

Overview:
The importance of safety in the work, health, and environment is utmost importance in today's industrial standards. Significance of safety is even more crucial with a large electric utility provider as TNB.

This course provides the basic safety knowledge with regard to common rules and legislations in Malaysia. Participants will also be given awareness of specific requirements working in the power plant environment such as safety practice at project site, Environmental Quality Act 127, safe scaffolding, and a effectively detail of TNBG’s Safety Rules (Mechanical Section 4 & 11).
 
Objective:
• Oblige Occupational Safety & Health Legislations
• To practice TNB Generation Safety Rules (Mechanical) Section 4 & 11 effectively
• To evaluate, control and evacuate in confined space
• To understand and practice Factories and Machinery Act 1967 Regulation 1986
• To design, erect and dismantle Frame Type and Tubular Type scaffolding correctly and safely
• To understand Environmental Quality Act 127


for any enquiries please update:

1. NAME: CHOOI WAI MUN
   Email: chooiwm@tnb.com.my

2. NAME: ABDUL HISHAM
   Email: hishamab@tnb.com.my
 

Target Participant: TNBG Operation & Maintenance (TT10)
Duration: 3 Days
Language:

RM 3.6K
Safety and Health in Power Plant - TT11
Power & Energy

3 Days

View Details

Overview:
The importance of safety in the work, health, and environment is utmost importance in today's industrial standards. Significance of safety is even more crucial with a large electric utility provider as TNB.

This course provides the basic safety knowledge with regard to common rules and legislations in Malaysia. Participants will also be given awareness of specific requirements working in the power plant environment such as safety practice at fired and fired pressure vessel plant, SEMS requirement, and an overview of TNBG (Mechanical & Electrical) Safety Regulations.
 
Objective:
• Oblige Occupational Safety & Health Legislations
• Observe Factories and Machinery Act 1967 Regulations 1970 (Steam Boiler & Unfired Pressure Vessel) and (Certificate of Competency)
• Observe Safety Excellent Management System requirement and carry out auditing as SEMS standard
• Execution safety practices according to TNBG (Mechanical & Electrical) Safety Regulations


for any enquiries please contact:

1. NAME: CHOOI WAI MUN
   Email: chooiwm@tnb.com.my

2. NAME: ABDUL HISHAM
   Email: hishamab@tnb.com.my
 

Target Participant: TNBG Operation & Maintenance (TT11)
Duration: 3 Days
Language:

RM 3.6K
Safety and Health in Power Plant - TT12
Power & Energy

3 Days

View Details

Overview:
The importance of safety in the work, health, and environment is utmost importance in today's industrial standards. Significance of safety is even more crucial with a large electric utility provider as TNB.

This course provides the basic safety knowledge with regard to common rules and legislations in Malaysia. Participants will also be given awareness of specific requirements working in the power plant environment such as safety practice at power plant sites, MSDS requirement, ergonomic principles as to OSHA 1994, and an overview of TNBG (Mechanical) Safety Regulations.
 
Objective:
• Executions safety practices throughout TNBG installation and to ensure the safety of all personnel
• Practice TNBG Mechanical Safety Rules, recognize the procedure of issue, obtain and cancel Permit To Work
• Apply and recognize  MSDS, and to identify the ergonomic principles as to OSHA 1994
• Implement  and follow Environmental Quality Act 1974


for any enquiries please contact:

1. NAME: CHOOI WAI MUN
   Email: chooiwm@tnb.com.my

2. NAME: ABDUL HISHAM
   Email: hishamab@tnb.com.my
 

Target Participant: TNBG Operation & Maintenance (TT12)
Duration: 3 Days
Language:

RM 3.6K
Safety and Health in Power Plant - TT13
Power & Energy

3 Days

View Details

Overview:
The importance of safety in the work, health, and environment is utmost importance in today's industrial standards. Significance of safety is even more crucial with a large electric utility provider as TNB.

This course provides the basic safety knowledge with regard to common rules and legislations in Malaysia. Participants will also be given awareness of specific requirements working in the power plant environment such as safety practice at power plant sites, Accident Investigation & reporting, and an overview of TNBG (Mechanical) Safety Regulations.
 
Objective:
• Executions safety practices throughout TNBG installation and to ensure the safety of all personnel
• To be able to review safety procedures, and carry out accident investigation and reporting effectively
• Conduct risk assessment and propose improvement
• Comply Factories and Machinery Act 1967
• Practice the TNBG Electrical Safety Rules


for any enquiries please contact:

1. NAME: CHOOI WAI MUN
   Email: chooiwm@tnb.com.my

2. NAME: ABDUL HISHAM
   Email: hishamab@tnb.com.my
 

Target Participant: TNBG Operation & Maintenance (TT13)
Duration: 3 Days
Language:

RM 3.6K
Safety Valve Principles and Overhaul
Power & Energy

3 Days

View Details

Overview:
The course is designed to improve participant’s know how about safety valve technology and maintenance work. The trainers will guide and facilitate the participants through examples and demonstration on  physical safety valves at ILSAS workshop.
 
Participants shall be introduced to various types of safety valves in a typical power plant along with their respective major components and working principles. The trainer will guide participants on overhauling work and the important setting  on critical parts. Trouble-shooting will be discussed.
Objective:

  • Explain the function of safety valve and it’s respective components.
  • List down the rule and regulations for the installation of safety valve.
  • Set the safety valve popping pressure and blow down pressure.
  • Inspect and overhaul safety valve according the proper procedure.


for any enquiries please contact:

1. NAME: CHOOI WAI MUN
   Email: chooiwm@tnb.com.my

2. NAME: JALIL ARRIFIN
   Email: jalila@tnb.com.my

Target Participant: Mechanical TNBG Technician TT09-TT12 & Steam Plant Operators
Duration: 3 Days
Language: English, Malay

RM 3.6K
Scaffolding Erection (Frame)
Power & Energy

3 Days

View Details

Overview:
This course is designed to explain the basic criteria for Scaffolding Erection (Frame) that affect procedure on erection and inspection. Participants will be guided in reviewing the Scaffolding Erection Frame in accordance with the requirements of the Building Operation and Works of Engineering Construction (Safety) Regulation 1986 (BOWEC) under the Factories and Machinery Act 139 (1967).

The training format is theory and practical, where the participants will be actively involved in the class & practical activities. Hence, it will increase their confidence level.

Participant will be taken through the vast experience of Scaffolding Erection Frame procedure and Inspection by the trainers. The emphasis is on participants continuing participation in ensuring the ultimate success of the course.
Objective:
After attending this training program, participants will be able to:

  1. Know and familiar with scaffolds and appreciate the obligation to use scaffolds.
  2. Explain the requirements of the Building Operations and Works of Engineering Construction (Safety) Regulation 1986 (BOWEC) under the Factories and Machinery Act 139 (1967).
  3. Identify the hazards at the construction site.
  4. Assess the hazards and risk at the working area.
  5. Design as well as load calculation, erect and dismantle Tubular Type Scaffolds correctly and safely.


for any enquiries please contact:

1. NAME: AMIR ABU
   Email: amira@tnb.com.my

Target Participant: TNBG, TNBD &TNBT; TT11-TT13, Mech. Engineers, Mech. Executives & Supervisors / Operators
Duration: 3 Days
Language: English, Malay

RM 3.6K
Scaffolding Erection (Tubular)
Power & Energy

3 Days

View Details

Overview:
This course is designed to explain the basic criteria for Scaffolding Erection (Tubular) that affects procedure and inspection. Participants will be guided in reviewing the Scaffolding Erection Tubular in accordance with the requirements of the Building Operation and Works of Engineering Construction (Safety) Regulation 1986 (BOWEC) under the Factories and Machinery Act 139 (1967).

The training format is theory and practical, where the participants will be actively involved in the class & practical activities. Hence, it will increase their confidence level.

Participant will be taken through the vast experience of Scaffolding Erection Tubular procedure and inspection by the trainers. The emphasis is on participants continuing participation in ensuring the ultimate success of the course.
Objective:
After attending this training program, participants will be able to:

  1. Know and familiar with scaffolds and appreciate the obligation to use scaffolds.
  2. Explain the requirements of the Building Operations and Works of Engineering Construction (Safety) Regulation 1986 (BOWEC) under the Factories and Machinery Act 139 (1967).
  3. Identify the hazards at the construction site.
  4. Assess the hazards and risk at the working area.
  5. Design as well as load calculation, erect and dismantle Tubular Type Scaffolds correctly and safely.


for any enquiries please contact:

1. NAME: AMIR ABU
   Email: amira@tnb.com.my

Target Participant: TNBG, TNBD & TNBT TT11-TT13, Mech. Engineers, Mech. Executives & Supervisors / Operators
Duration: 3 Days
Language: English, Malay

RM 3.6K
Shaft Alignment - Reverse Indicator and Laser (2nd…
Power & Energy

3 Days

View Details

Overview:
The course is designed to improve participant’s knowledge on  reversed indicator method shaft alignment. Preparation to performing shaft alignment with reversed indicator method. The trainers will guide and facilitate the participants through examples and demonstration on alignment rigs at ILSAS alignment laboratory.
 
Principle of reversed indicator method shaft alignment will be taught from preparation, mounting the dial gauges, measuring techniques, calculation, and actual correction itself.
 
Other related topics covered is hot and cold alignment, the use of gaphical methods, and Laser Alignment technology.
Objective:
Upon completion of this course, participants will be:

  • Perform shaft alignment using reversed indicator techniques
  • Perform shaft alignment  using Laser Alignment
  • Perform shaft alignment within specified tolerance
  • Carry out corrective action on machine with hot and cold working condition

for any enquiries please contact:

1. NAME: CHOOI WAI MUN
   Email: chooiwm@tnb.com.my

2. NAME: JALIL ARRIFIN
   Email: jalila@tnb.com.my

Target Participant: Mechanical TNBG Assistant Tech (TT05-TT06) & Technician (TT09-TT12)
Duration: 3 Days
Language: English, Malay

RM 3.6K
Shaft Alignment - Single Indicator (1st Method-Pump…
Power & Energy

3 Days

View Details

Overview:
The course is designed to improve participant’s knowledge on shaft alignment technology. The trainers will guide and facilitate the participants through examples and demonstration on physical alignment rigs and real pump at ILSAS alignment laboratory.

Participants shall be introduced to various types of precision equipment such as vernier caliper, micrometer, dial gauge and feeler gauge. Measuring techniques and basic trouble-shooting will be discussed.
Objective:
Upon completion of this course, participants will be:

  • Perform shaft alignment using single Indicator method
  • Perform shaft alignment within specified tolerance
  • Carry out corrective action on misalign shaft
  • Perform measuring techniques sweep reading
  • Perform alignment pump and motor


for any enquiries please contact:

1. NAME: CHOOI WAI MUN
   Email: chooiwm@tnb.com.my

2. NAME: JALIL ARRIFIN
   Email: jalila@tnb.com.my

Target Participant: Mechanical TNBG Assistant Tech (TT05-TT06) & Technician (TT09)
Duration: 3 Days
Language: English, Malay

RM 3.6K
Shielded Metal Arc Welding (SMAW) 3G / Persijilan…
Power & Energy

5 Days

View Details

Overview:

Program ini membentuk kemahiran dan keyakinan pelatih untuk membuat proses kimpalan Shielded Metal Arc Welding (SMAW) di atas carbon steel dengan menggunakan pelbagai elektrod di dalam pelbagai posisi kimpalan (sehingga posisi vertical uphill – 3G) berpandukan Welding Procedure Specification (WPS) yang sesuai. Contohnya, Codes & Standard yang berkaitan dengan ASME Section IX dan / atau AWS D1.1


Objective:


Target Participant:
Duration: 5 Days
Language:

RM 3.6K
Shielded Metal Arc Welding (SMAW) F1 / Persijilan…
Power & Energy

5 Days

View Details

Overview:

This course is designed to explain the basic criteria for welding requirement that affect procedure and performance. Participants will be guided in reviewing the Welding. Identify and understand the working principle and application of Shielded Metal Arc Welding (SMAW), understand common welding defect, understand methods of detecting welding defect (NDT) and perform welding on mild steel plate (Straight Bead, Padding & 1F Position).

The training format is theory and practical, where the participants will be actively involved in the class & practical activities. Hence, it will increase their confidence level.

Participant will be taken through the vast experience of welding procedure and performance by the trainers. The emphasis is on participants continuing participation in ensuring the ultimate success of the course.
 


Objective:
After attending this training program, participants will be able to:

1. Identify and understand the working principle and application of Shielded Metal Arc Welding (SMAW).
2. Understand common welding defect.
3. Understand methods of detecting welding defect (NDT).
4. Perform welding on mild steel plate (Straight Bead, Padding & 1F Position).


for any enquiries please contact:

1. NAME: AMIR ABU
     Email: amira@tnb.com.my
 
 

Target Participant: Technicians, Mech. Engineers, Mech. Executives, Welding Practitioners
Duration: 5 Days
Language:

RM 3.6K
Single Phase Power Electronics
Power & Energy

3 Days

View Details

Overview:
The course is designed to improve participant’s skill to carry out the concepts of single phase power electronic in theirs working place. Trainer will guide and facilitate participants as their doing their practices and observed their safety as part of the training.

The training format is on theory and practical, where the participants will be actively involved in the lab activities. Hence, it will increase their confidence level and safety awareness.

“Learning by doing” is a basic principle adopted in this training. Participant will be taken through the vast experiences of training by the trainer. The emphasis is on participants continuing participation in ensuring the ultimate success in the course.
Objective:
Upon completion of this workshop, participants will be able to:

  • To acquire the fundamental knowledge of power electronic applications in term of single phase and retification of various load applied.
  • To state the effects of resistive and inductive load in the single phase retification application

for any enquiries please contact:

1. NAME: IR. YEOH CHIEN WERN
   Email: yeohcw@tnb.com.my

2. NAME: TAN BENG WEE
   Email: tanbw@tnb.com.my

 

Target Participant: C&I & Electrical Technical TT09-TT12 & individuals or technicians involved in electrical field
Duration: 3 Days
Language:

RM 3.6K
Standards and Codes for Power Plant Construction and…
Power & Energy

4 Days

View Details

Overview:
This course is designed to explain the basic Standard & Code for Power Plant Construction & Maintenance. Participants will be guided in identify and reviewing the relevant Section for Boiler Design, Pressure Vessel Design, Non-Destructive Examinations & Welding as per the requirement of ASME.

The training format is theory and case study, where the participants will be actively involved in the class & workshop activities. Hence, it will increase their confidence level.

Participant will be taken through the vast experience of Inspection procedure and performance by the trainers. The emphasis is on participants continuing participation in ensuring the ultimate success of the course.
Objective:
After attending this training program, participants will be able to:

  • Enumerate all Sections of ASME Boiler and Pressure Vessel Codes (BPVC).
  • Identify the relevant Section for Boiler Design, Pressure Vessel Design, Non-Destructive Examinations & Welding as per the requirement of ASME.
  • Review Inspection & Test Plan.
  • Review Factory & Machinery Act (FMA) & Environmental Quality Act (EQA).

for any enquiries please contact:

1. NAME: AMIR BIN ABU
   Email: amira@tnb.com.my

Target Participant: TNBG TT11-TT13, Mech. Engineers & Mech. Executives
Duration: 4 Days
Language: English, Malay

RM 3.6K
Standards and Codes For Power Plant Construction and…
Power & Energy

3 Days

View Details

Overview:
This course is designed to explain the basic Standard & Code for Power Plant Construction & Maintenance. Participants will be guided in identify and reviewing the relevant Section for Boiler Design, Pressure Vessel Design, Non-Destructive Examinations & Welding as per the requirement of ASME.

The training format is theory and case study, where the participants will be actively involved in the class & workshop activities. Hence, it will increase their confidence level.

Participant will be taken through the vast experience of welding procedure and performance by the trainers. The emphasis is on participants continuing participation in ensuring the ultimate success of the course.
Objective:
After attending this training program, participants will be able to:

  1. Enumerate all Sections of ASME Boiler and Pressure Vessel Codes (BPVC).
  2. Identify the relevant Section for Boiler Design, Pressure Vessel Design, Non-Destructive Examinations & Welding as per the requirement of ASME.
  3. Review Inspection & Test Plan
  4. Review Factory & Machinery Act (FMA) & Environmental Quality Act (EQA).

for any enquiries please contact:

1. NAME: AMIR ABU
   Email: amira@tnb.com.my

Target Participant: TNBG TT11-TT13, Mech. Engineers & Mech. Executives
Duration: 3 Days
Language:

RM 3.6K
Standby Generator Set
Power & Energy

5 Days

View Details

Overview:
This course will provide an overview of standby generator set, primarily focusing on low voltage standby generator system. This course covers fundamental of Low Voltage (LV) generator excitation systems, including: generator, excitation system components, automatic voltage regulator and saturation curve test. The training methodology is theory and practical, where the participants will be actively involved in the hands-on activities. At the end of the course, participants will achieve sound knowledge in troubleshooting generator set problems in accordance with manufacturer’s specification.
Objective:
Upon completion of this course, participants will be able to:

  • Describe the function of generator excitation components
  • Troubleshoot generator faults.
  • Interpret (analyze) generator test results
  • Troubleshoot standby generator set problems


for any enquiries please contact:

1. NAME: YEOH CHIEN WERN
  Email: yeohcw@tnb.com.my

2. NAME: SOH LEY BAU
   Email: sohlb@tnb.com.my

Target Participant: Electrical Supervisor, Engineer & Electrical Technician
Duration: 5 Days
Language: English, Malay

RM 3.6K
Static and Dynamic Balancing
Power & Energy

3 Days

View Details

Overview:
This course will introduce use of Vibration signature analysis to determine genuine unbalance affected machinery.  Participants will learn how to setup strobe light key phaser to determine the High spot and heavy spot on both Flexible and Rigid rotors.
 
Methods covered are 4 runs without phase using polar charting, single trial weight and polar charting for single plane corrections, and use on single plane methods for 2 plane corrections. All methods a taught via hands on in our vibration laboratory.
 
Participants will be taught how to determine correction residual unbalance limit and trim the unbalance until limit is achieve for both single and 2 plane unbalance.
Objective:

  • Able to identify characteristic of actual unbalance dominant vibration signature
  • Able to differentiate static and dynamic unbalance
  • Able to perform one and two plane balancing of unbalance rotor to the required standard using polar chart and vector calculations
  • Able to determine limit of residual unbalance


for any enquiries please contact:

1. NAME: CHOOI WAI MUN
   Email: chooiwm@tnb.com.my

2. NAME: ABDUL RAZAK
   Email: razakm@tnb.com.my

Target Participant: TNBG Mechanical Maintenance
Duration: 3 Days
Language: English, Malay

RM 3.6K
Station Black Start Operation
Power & Energy

3 Days

View Details

Overview:

The course is designed to improve participant’s skill to carry out a training on:

• Establishing the power supply for safe shutdown
• Single line diagram
• Running up of auxiliaries and startup unit for synchronizing
• Case Study:
   o Hydro
   o Thermal
   o Opstrang
   o Practical

The trainers will guide and facilitate the participants. The training format are theory and practical.


Objective:

After attending this training program, participants will be able to:

• Describes the procedure for a black start operation
• Start up of the station from a ‘black’ condition
• Identify the emergency board and its feeders
• Explain the single line diagram of power plant and its local network.
• Interpret the single line diagram

accurately by referring to the given slides / notes


for any enquiries please contact:

1. NAME: ABDUL HISHAM ABDUL HALIM
   Email: ahisham.ahalim@tnb.com.my

2. NAME: YEOH CHIEN WERN
   Email: yeohcw@tnb.com.my
 



Target Participant: TNB Generation Technician - TT11-14 (Generation Operation-Thermal) & TT07-14 (Generation Operation-Hydro)
Duration: 3 Days
Language:

RM 3.6K
Steam Engine Driver Grade 1
Power & Energy

4 Days

View Details

Overview:
This course offers for participants to equipped with relevant knowledge and skill to sit for Steam Engine Driver Grade 1 test, conducted by Department of Occupational Safety and Health (DOSH). Its consists of Act and Regulations (FMA Act 139 & OSHA Act 514); Boiler introduction (history, steam cycles, types and classification of boiler); Boiler main components & essential fittings; Boiler maintenance; Principle of boiler operation; Boiler commissioning activities; Boiler water treatment; Boiler tube failures due to boiler water chemistry; Non destructive testing done in boilers; Simulation of actual DOSH exam interview.
Objective:
At the end of the course, participants will be:

Equipped with relevant knowledge and skill to sit for Steam Engine Driver Grade 1 exam, conducted by Department of Occupational Safety and Health (DOSH) such as:

  • Act and Regulations (FMA Act 139 & OSHA Act 514)
  • Oral examination skill
  • Safety valve setting and identification of its components
  • Identification of boiler essential fittings
  • Boiler tube failures due to boiler water
Able to implement proper safety procedures in carrying out boiler operations and maintenances


for any enquiries please contact:

1. NAME: Ir. YEOH CHIEN WERN
   Email: yeohcw@tnb.com.my

2. NAME: MOHD KHAIRUL FIKRI BIN MOHD SALLEH
   Email: khairul.fikri@tnb.com.my

Target Participant: Steam Driver Candidate
Duration: 4 Days
Language: English, Malay

RM 3.6K
Steam Engine Driver Grade 2
Power & Energy

4 Days

View Details

Overview:
This course offers for participants to equipped with relevant knowledge and skill to sit for Steam Engine Driver Grade 2 test, conducted by Department of Occupational Safety and Health (DOSH). Its consists of Act and Regulations (FMA Act 139 & OSHA Act 514); Boiler introduction (history, steam cycles, types and classification of boiler); Boiler main components & essential fittings; Combustion and its auxiliary system; Boiler maintenance; Principle of boiler operation; Boiler commissioning activities; Boiler water treatment; Simulation of actual DOSH exam interview.
Objective:
At the end of the course, participants will be:

Equipped with relevant knowledge and skill to sit for Steam Engine Driver Grade 2 exam, conducted by Department of Occupational Safety and Health (DOSH) such as:

  • Act and Regulations (FMA Act 139 & OSHA Act 514)
  • Oral examination skill
  • Basic operation of utility and packaged boilers
  • Identification of boiler essential fittings
  • Gauge glass testing

Able to implement proper safety procedures in carrying out boiler operations and maintenances


for any enquiries please contact:

1. NAME: IR. YEOH CHIEN WERN
   Email: yeohcw@tnb.com.my

2. NAME: MOHD KHAIRUL FIKRI BIN MOHD SALLEH
   Email: khairul.fikri@tnb.com.my

Target Participant: Steam Driver Candidate
Duration: 4 Days
Language: English, Malay

RM 3.6K
Steam Engine Driver Preparatory Grade 1 and Grade…
Power & Energy

2 Days

View Details

Overview:
It is a topic that  will enable to demonstrate confidence in answering oral questions and exam for those who keen and wish to sit for Steam Engine Driver Grade 1 & Grade 2  by the Department of Occupational Safety and Health (DOSH).
 
The topic that will be covered are Overview of Boiler; Act and Regulations on Boiler & Unfired Pressure Vessel; Boiler main components & essential fittings; Principle of boiler operation; Mock oral examination for Steam Engine Driver Grade 1 test.
Objective:
 
At the end of the course, participants will be:

  • To demonstrate confidence in answering oral questions.
  • To answer DOSH oral exam confidently and successfully.
  • To equip with sufficient knowledge to answer relevantly.


for any enquiries please contact:

1. NAME: Ir.YEOH CHIEN WERN
   Email: yeohcw@tnb.com.my

2. NAME: MOHD KHAIRUL FIKRI BIN MOHD SALLEH
   Email: khairul.fikri@tnb.com.my

Target Participant: Steam Driver Candidate
Duration: 2 Days
Language: English, Malay

Human Resource Minister - Training Provider Award 2007
Role Model Company 2013 for Electrical Training Programmes by Manpower Department (JTM)
Energy Industry Award: Training Institution Excellence 2011

TNB Integrated Learning Solution Sdn Bhd - ILSAS
Jalan IKRAM-UNITEN, Karung Berkunci 205,
43650 Bandar Baru Bangi, Selangor, MALAYSIA

T: (+6) 03-8922 7222 F: (+6) 03-8926 4437 E: infoilsas@tnb.com.my

© 2017 TNB ILSAS