Power & Energy

RM 3.6K
Non-Destructive Testing: Application of Magnetic Particle…
Power & Energy

4 Days

View Details

Overview:
This course is designed to explain the basic criteria for Identify material processes and classification of defects, state physical principle of the test, list out advantages and limitations, Identify testing technique and testing equipment, and then carry out the test in accordance with Codes, Standards and Specifications (ASME Section V), Select the most appropriate testing technique for the inspection and able to prepare testing procedure, Identify and evaluate discontinuities and defects in accordance with Codes, Standards and Specifications given (ASME) and Adhere safety precautions in Magnetic Particle Testing.

The training format is theory and practical, where the participants will be actively involved in the class & workshop activities. Hence, it will increase their confidence level.

Participant will be taken through the vast experience of magnetic particles testing methods in power plants inspection procedure and performance by the trainers. The emphasis is on participants continuing participation in ensuring the ultimate success of the course.
Objective:
After attending this program, participants will be able to:

Select the best technique and perform the test on power plants and mechanical components by using Magnetic Particles Testing Method to detect surface / sub surface discontinuities and defects in accordance with Codes, Standards and Specifications used.


for any enquiries please contact:

1. NAME: AMIR ABU
   Email: amira@tnb.com.my

Target Participant: Technicians, Mech. Engineers, Mech. Executives, Mech. Non-Executives & QA/QC Engineers
Duration: 4 Days
Language: English, Malay

RM 3.6K
Non-Destructive Testing: Journal Bearing as per ISO…
Power & Energy

3 Days

View Details

Overview:
This course is designed to explain the basic criteria for Journal Bearing Inspection as per ISO 4386/1 and ISO 4386/3. Participants will be guided in reviewing and performing NDT Inspection on Journal Bearing by using Penetrant Testing and Ultrasonic Test Method.

The training format is theory and practical, where the participants will be actively involved in the class & practical activities. Hence, it will increase their confidence level in performing the inspection.

Participant will be taken through the vast experience of inspection procedure and inspection technique by the trainers. The emphasis is on participants continuing participation in ensuring the ultimate success of the course.
Objective:
After attending this training program, participants will be able to:

  1. Inspect and evaluate the result of PT and UT performed on Journal
  2. The responsibilities of QC inspectors into their specific duties and involvement in the inspection activities
The use of acceptance and rejection criteria based on ISO 4386-1 and ISO 4386-3 codes and standards.


for any enquiries please contact:

1. NAME: AMIR ABU
   Email: amira@tnb.com.my

Target Participant: TNBG TT09-TT13, Mech. Engineers & Mech. Executives
Duration: 3 Days
Language: English, Malay

RM 3.6K
Non-Destructive Testing: Liquid Penetrant Testing…
Power & Energy

5 Days

View Details

Overview:
The course is designed to improve participant’s skill to carry out and monitor Non Destructive Testing – Liquid Penetrant Testing Method performed by the Inspector. The trainers will guide and facilitate the participants, so that they can to improve their ability to performed effective monitoring on Liquid Penetrant Inspection.

The training format is theory and practical, where the participants will be actively involved in the class activities. Hence, it will increase their confidence level.

“Learning by doing” is a basic principle adopted in this training. Participant will be taken through the vast experience of training by the trainers. The emphasis is on participants continuing participation in ensuring the ultimate success of the course.
Objective:
Select the best technique and perform the test on power plants and mechanical components by using Liquid Penetrant Testing Method to detect surface discontinuities and defects in accordance with Codes, Standards and Specifications used.


for any enquiries please contact:

1. NAME: AMIR BIN ABU
   Email: amira@tnb.com.my

Target Participant: Mechanical Engineer, QA/QC Engineer, QA/QC Inspector, Technical Executive & Maintenance Technician
Duration: 5 Days
Language: English, Malay

RM 3.6K
Non-Destructive Testing: Magnetic Particles Testing…
Power & Energy

5 Days

View Details

Overview:
This course is designed to explain the basic criteria for Identify material processes and classification of defects, state physical principle of the test, list out advantages and limitations, Identify testing technique and testing equipment, and then carry out the test in accordance with Codes, Standards and Specifications (ASME Section V), Select the most appropriate testing technique for the inspection and able to prepare testing procedure, Identify and evaluate discontinuities and defects in accordance with Codes, Standards and Specifications given (ASME) and Adhere safety precautions in Magnetic Particle Testing.

The training format is theory and practical, where the participants will be actively involved in the class & workshop activities. Hence, it will increase their confidence level.

Participant will be taken through the vast experience of magnetic particles testing methods in power plants inspection procedure and performance by the trainers. The emphasis is on participants continuing participation in ensuring the ultimate success of the course.
Objective:
After attending this program, participants will be able to:

Select the best technique and perform the test on power plants and mechanical components by using Magnetic Particles Testing Method to detect surface / sub surface discontinuities and defects in accordance with Codes, Standards and Specifications used.


for any enquiries please contact:

1. NAME: AMIR ABU
   Email: amira@tnb.com.my

Target Participant: Technicians, Mech. Engineers, Mech. Executives, Mech. Non-Executives & QA/QC Engineers
Duration: 5 Days
Language: English, Malay

RM 3.6K
Non-Destructive Testing: Power Plant
Power & Energy

5 Days

View Details

Overview:
This course covers applications associated with four (4) main types of Non Destructive Testing and offers a high practical content and relevant theoretical background to enable course participants to achieve the understanding of NDT.

The training format is theory and practical, where the participants will be actively involved in the class activities. Hence, it will increase their confidence level.

“Learning by doing” is a basic principle adopted in this training. Participant will be taken through the vast experience of training by the trainers. The emphasis is on participants continuing participation in ensuring the ultimate success of the Course.
Objective:
After attending this program, participants will be able to:

  • Identify / enumerate four (4) main types of NDT inspection methods used in power plant inspection.
  • Select the most appropriate NDT method / technique for the inspection   of power plant components in accordance to relevant code and standards.


for any enquiries please contact:

1. NAME: AMIR BIN ABU
   Email: amira@tnb.com.my

Target Participant: TNBG TT09-TT13, Mech. Engineers & Mech. Executives
Duration: 5 Days
Language: English, Malay

RM 3.6K
Non-Destructive Testing: Ultrasonic Testing Method…
Power & Energy

5 Days

View Details

Overview:
This course covers applications associated with Non Destructive Testing - Ultrasonic Testing Method (compressional wave) and offers a high practical content and relevant theoretical background to enable course participants to achieve the understanding of Ultrasonic Inspection.

The training format is theory and practical, where the participants will be actively involved in the class and practical activities. Hence, it will increase their confidence level in performing and monitoring Ultrasonic Inspection activities.

“Learning by doing” is a basic principle adopted in this training. Participant will be taken through the vast experience of training by the trainers. The emphasis is on participants continuing participation in ensuring the ultimate success of the Course.
Objective:
After attending this training program, participants will be able to:

1.Calibrate an Ultrasonic Flaw Detector.
2.Perform Ultrasonic Inspection using Straight Probes compressional (Compressional Wave).


for any enquiries please contact:

1. NAME: AMIR ABU
   Email: amira@tnb.com.my

Target Participant: TNBG TT09-TT13, Mech. Engineers & Mech. Executives
Duration: 5 Days
Language: English, Malay

RM 3.6K
Non-Destructive Testing: Ultrasonic Testing using…
Power & Energy

3 Days

View Details

Overview:
 
This course covers applications associated with Non Destructive Testing - Ultrasonic Testing Method (compressional wave) and offers a high practical content and relevant theoretical background to enable course participants to achieve the understanding of Ultrasonic Inspection.

The training format is theory and practical, where the participants will be actively involved in the class and practical activities. Hence, it will increase their confidence level.

“Learning by doing” is a basic principle adopted in this training. Participant will be taken through the vast experience of training by the trainers. The emphasis is on participants continuing participation in ensuring the ultimate success of the Course.
Objective:
After attending this training program, participants will be able to:

  1. Calibrate an Ultrasonic Flaw Detector.
  2. Perform Ultrasonic Inspection using direct compressional probes.


for any enquiries please contact:

1. NAME: AMIR ABU
   Email: amira@tnb.com.my

Target Participant: TNBG TT09-TT13
Duration: 3 Days
Language: English, Malay

RM 3.6K
Occupational Safety & Health in Power Plant - Engineers…
Power & Energy

5 Days

View Details

Overview:
The importance of safety in the work, health, and environment is utmost importance in today's industrial standards. Significance of safety is even more crucial with a large electric utility provider as TNB.

This course provides the basic safety knowledge with regard to OSHA rules and legislations in Malaysia. Participants will also be given awareness of specific requirements working in the power plant environment such as Hazard Identification, Risk Assessment and Risk Control (HIRARC), Fire safety and prevention, Emergency Response Plan, and working in Confined Space.
 
Objective:
• Protect workers against risks to safety or health arising of the activities of persons at work
• Comply The Notification of Accident, Dangerous Occurrences, Occupational Poisoning and Diseases - (NADOPOD - OSHA Regulation 2004)
• To mobilize hazard control and risk assessment
• To provide and sustain fire safety and prevention
• Continuously keep respond to unexpected emergency situation
• Control and implement confined space working procedures


for any enquiries please contact:

1. NAME: CHOOI WAI MUN
   Email: chooiwm@tnb.com.my

2. NAME: ABDUL HISHAM
   Email: hishamab@tnb.com.my
 

Target Participant: TNBG Engineers Operation & Maintenance
Duration: 5 Days
Language:

RM 3.6K
Occupational Safety and Health Act (OSHA)
Power & Energy

2 Days

View Details

Overview:
This course is designed to explain the fundamentals of Occupational Safety and Health Act (OSHA 1994). Participants will be introduced to this Act, covering all the necessary aspects pertaining to the occupational safety, health and welfare of persons at work.
The training format is mainly theoretical, where the participants will be actively involved in the class & discussion activities. Hence, it will increase their confidence level in adhering to this OSHA 1994.
Participant will be taken through the vast experience of OSHA 1994 by the trainer. The emphasis is on participants continuing participation in ensuring the ultimate success of the course.
Objective:
After attending this training program, participants will be able to:

  • To secure the safety, health and welfare of persons at work against risks to safety or health arising out the activities of persons at work.
  • To protect at a place of work other than at work against risks to safety or health arising of the activities of persons at work.
  • To promote an occupational environment for persons at work which is adapted to their physiological and psychological needs.
  • To provide the means where by the associated Occupational Safety & Health legislations may be progressively replaced by a system of regulations and approved industry codes of practice operating in combination with the provisions of this Act deigned to maintain or improve the standards of safety and Health.


Target Participant: OPEN
Duration: 2 Days
Language: English, Malay

RM 3.6K
Operation of Low Voltage Switch Board
Power & Energy

5 Days

View Details

Overview:
This course is designed to provide participants the fundamental layout of low voltage <1000V switchboard in a typical industrial plant. This course covers basic low voltage switchboard designs, types of breakers used, basic maintenance of breakers and safety issues associated with low voltage switchboard.

The training methodology is theory and practical, where the participants will be actively involved in the hands-on activities. The course also includes practical training to operate and shut down low voltage switchboard in accordance with Electrical Act 1990.
Objective:
Upon completion of this course, participants will be able to:

• Conduct required breaker maintenance and testing
• Locate and rectify breaker problems
• Describe the standard practice of breaker operations
• Describe shutdown procedures of switchboard


for any enquiries please contact:

1. NAME: YEOH CHIEN WERN
   Email: yeohcw@tnb.com.my

2. NAME: SOH LEY BAU
   Email: sohlb@tnb.com.my
 

Target Participant: Electrical Supervisor, Engineer & Electrical Technician
Duration: 5 Days
Language:

RM 3.6K
Operational Overview of Chargeman Function in Power…
Power & Energy

5 Days

View Details

Overview:
This course provides a comprehensive knowledge about operational overview of chargeman function in power plant. This course covers job functions of chargeman, switching procedures, standard practice of breaker operation, High Voltage Generator, Automatic Voltage Regulator (AVR) and synchronizing. The targeted audience of this course are power plant new engineers, shift engineers and supervisors.

The goal of the course is to give new engineers to familiarize the responsibilities and working environment of chargeman in power plant. The training methodology is theory and group discussion, where the participants will be actively involved in the class activities.
 
Objective:

Upon completion of this course, participants will be able to:

• Describe the Functions of Chargeman in Electrical System
• Describe Switching Procedures of Power Plant Electrical Distribution
• Describe the Principle of High Voltage Generator, Excitation System
• Perform Synchronizing


for any enquiries please contact:

1. NAME: YEOH CHIEN WERN
   Email: yeohcw@tnb.com.my

2. NAME: SOH LEY BAU
   Email: sohlb@tnb.com.my
 



Target Participant: Supervisor, Engineer & Shift Engineers
Duration: 5 Days
Language:

RM 3.6K
PID Controller Tuning
Power & Energy

2 Days

View Details

Overview:
The course is designed to improve participant's skill to PID Controller Tuning in their's working place.

The training format is on theory and practical, where the participants will be actively involved in the lab activities. 
Objective:

  • Descrive the basic concepts of automatic control
  • Demonstrate understanding in operation of an auto control system
  • Identifiy and explain the basis of control actions.
  • Tune PID (proportional, integral and derivative) process controller.
Without any mistake.


for any enquiries please contact:

1. NAME: IR.YEOH CHIEN WERN
   Email: yeohcw@tnb.com.my

2. NAME: TAN BENG WEE
   Email: tanbw@tnb.com.my

Methodology: presentation, discussion, demonstration
Prerequisites:
Target Participant: C & I personnel TT09-TT14, individuals or technicians involved in maintenance of process measurement
Duration: 2 Days
Language: English, Malay

RM 3.6K
Planetary Life Support System
Power & Energy

2 Days

View Details

Overview:
The term biodiversity was coined only in the late 1980s. It is an abbreviation for „biological diversity‟. Biodiversity combines the concepts of plants and animal as genetic resources, the diversity of species and the habitats in which they live, in one term. The present usage of the term is that biodiversity is the totality and variety of living organisms on earth.

“Learning by doing” is a basic principle adopted in this training. Participant will be taken through the vast experience of training by the trainers. The emphasis is on participants continuing participation in ensuring the ultimate success of the course.
Objective:
Upon completion of this course, participants will be able to:

  • Describe the intricate relationship among species and between species (including humans)
  • Identify the ecological functions of biological biodiversity
  • Identify the impact of power generation on biological biodiversity
  • Manage how to develop a biodiversity conservation projects


for any enquiries please contact:

1. NAME: IR. WAN AMINUDDIN BAKI BIN ABDUL KHALID
   Email: aminuddinak@tnb.com.my

2. NAME: ANNAS BIN AHMAD SALLEH
   Email: annass@tnb.com.my

Target Participant: Engineer, Chemist, Energy Manager, Environment Officer, Power Utility Executives, Occupational Safety & Health Officers & Government Officials
Duration: 2 Days
Language:

RM 3.6K
Plant Isolation and Normalization
Power & Energy

2 Days

View Details

Overview:

The course main focus is on risk to the safety of people, particularly where activities present potential major accident hazard. Avoiding loss of containment will improve environment protection and reduce business interruption.

The effectiveness of an isolations and normalisation system depends on the adequacy of other arrangement, including work control system- especially permit to work, operating and shutdown procedure, management of change and contingency plans.

The trainers will guide and facilitate the participants how to isolate and normalize plant and equipment safely, and how to reduce the risk of releasing hazardous substances during intrusive activities such as maintenance and sampling operations.

 

 


Objective:

Terminal Objective:

Using correct methodology, participants will able to interpret/developed relevant of plant isolation and normalization in power plant

Course Objectives:

On completion of the course, participant will be able to:

  • Describe the importance of normalization & isolation
  • Describe and perform the normalization & isolation of selected boiler system
  • Describe and perform the normalization & isolation of selected steam turbine system
  • Describe and perform the normalization & isolation of selected

for any enquiries please contact:

1. NAME: IR. YEOH CHIEN WERN
     Email: yeohcw@tnb.com.my

2. NAME: MOHD KHAIRUL FIKRI B. MOHD SALLEH
     Email: khairul.fikri@tnb.com.my
 



Target Participant: TT07 - 10
Duration: 2 Days
Language:

RM 3.6K
Plant Isolation and Normalization
Power & Energy

2 Days

View Details

Overview:
The course main focus is on risk to the safety of people, particularly where activities present potential  major  accident  hazard.  Avoiding  loss  of  containment  will  improve  environment protection and reduce business interruption.

The  effectiveness  of  an  isolations  and  normalisation  system  depends  on  the  adequacy  of other arrangement, including work control system-especially permit to work, operating and shutdown procedure, management of change and contingency plans.

The trainers will guide and facilitate the participants how to isolate and normalize plant and equipment  safely,  and  how  to  reduce  the  risk  of  releasing  hazardous  substances  during intrusive activities such as maintenance and sampling operations.
Objective:
Terminal Objective:

Using correct methodology, participants will able to interpret/developed relevant of plant isolation and normalization in power plant

Course Objectives:

  • On completion of the course, participant will be able to:
  • Describe the importance of normalization & isolation
  • Describe and perform the normalization & isolation of selected boiler system
  • Describe and perform the normalization & isolation of selected steam turbine system
  • Describe and perform the normalization & isolation of selected

for any enquiries please contact:

1. NAME: IR. YEOH CHIEN WERN
   Email: yeohcw@tnb.com.my

2. NAME: MOHD KHAIRUL FIKRI BIN MOHD SALLEH
   Email: khairul.fikri@tnb.com.my

Target Participant: TNB Generation Technician TT07-TT10
Duration: 2 Days
Language:

RM 3.6K
Power Grid System Operation
Power & Energy

3 Days

View Details

Overview:
The course is designed to improve participant’s knowledge and skill to work out on:

  • Grid System & IPP
  • Grid Frequency & Voltage control
  • Switchyard Equipment
  • Load Profile
  • Under Frequency Load Shedding
  • Emergency Response Plan

The trainers will guide and facilitate the participants. The training format is theoretical and case study reviews.
Objective:
Upon completion of this course, participants will be able to:
  • Explain the single line diagram of power plant and its local network
  • Define The National Grid System
  • Explain The Function Of Switchyard
  • Explain The Equipment Of Switchyard
  • Describe Grid Frequency & Voltage control
  • Describe The Emergency Response Plan

accurately by referring to slides / notes given.


for any enquiries please contact:

1. NAME: ABDUL HISHAM ABDUL HALIM
   Email: ahisham.ahalim@tnb.com.my

2. NAME: YEOH CHIEN WERN
   Email: yeohcw@tnb.com.my

Target Participant: TNB Generation Technician - TT11-14 (Generation Operation-Thermal) & TT07-14 (Generation Operation-Hydro)
Duration: 3 Days
Language:

RM 3.6K
Power Plant Chemistry
Power & Energy

2 Days

View Details

Overview:
It is a topic that will enable power plant engineers, junior chemists and senior operators to be aware and take appropriate and timely actions to avoid huge amount of losses, due to damaging effects of out of range chemical properties of power plant processes.

The importance to adhere to the various design values and the reasons why, are covered in this two-day session. Case studies shall also be shared with participants to demonstrate that such losses can be prevented by having crucial knowledge in power plant chemistry.
Objective:
Terminal Objective:

With the notes given, participant will be able to explain the power plant chemistry correctly.

Course Objectives:

On completion of the course, participants will be able to gain a wide range knowledge comprising of:

  • water cycle chemistry of a thermal plant
  • properties of fuel
  • condition monitoring of lubricating oil and transformer oil
  • environmental control and monitoring


for any enquiries please contact:

1. NAME: IR. YEOH CHIEN WERN
   Email: yeohcw@tnb.com.my

2. NAME: MOHD KHAIRUL FIKRI BIN MOHD SALLEH
   Email: khairul.fikri@tnb.com.my

Target Participant: Individuals / Executives involved in Power Plant Operations especially Operators, Shift Engineers, Maintenance Engineers & Junior Plant Chemists
Duration: 2 Days
Language: English, Malay

RM 3.6K
Power Plant Monitoring
Power & Energy

3 Days

View Details

Overview:
It is a topic that  will enable technicians to define the definition of temperature, pressure, flow, level and vibration. Stating basic instrumentation used in power plants, the importance of taking readings, types of analyzer being used in power plant. Creating simple checklist and record for importance parameter. Explaining what is plant maintenance scheduling and Condition Monitoring. Eventually, describing which parameter usually monitored in various system in Power Plant what physical monitoring to be done in power plant.
Objective:

Terminal Objective:

With the notes given, participant will be able to explain various power plant monitoring parameters and devices correctly.

Course Objectives:

On completion of the course, participants will be able to define and explain:

  • Instrumentation and its measurement
  • Alarm system in power plant
  • Plant physical and condition monitoring
  • Case study

for any enquiries please contact:

1. NAME: IR. YEOH CHIEN WERN
     Email: yeohcw@tnb.com.my

2. NAME: MOHD KHAIRUL FIKRI B. MOHD SALLEH
     Email: khairul.fikri@tnb.com.my
 
 



Target Participant: TT09 - 12
Duration: 3 Days
Language:

RM 3.6K
Power Purchase Agreement (PPA) / Service Level Agreement…
Power & Energy

2 Days

View Details

Overview:

This course offers to participants for adhere and comply the requirement of Power Purchase Agreement (PPA) / Service Level Agreement (SLA). Its consists of introduction to PPA / SLA; SLA salient term; SLA for thermal plant; SLA for hydro plant; operation requirement including declaration and reporting; commercial requirement including commercial term (e.g. Capacity Rate Financial, Fixed Operating Rate, Variable Operating Rate) and billings (e.g. Energy Payment, Capacity Payment); SLA other requirements such as penalty (e.g. Failure Despatch Instruction) and case study.

Participant will be taken through the vast experience of this course. The emphasis is on participants continuing participation in ensuring the ultimate success of the courses.


Objective:

Terminal Objective:

Participants will be able to adhere and comply correctly the requirements of Power Purchase Agreement (PPA) / Service Level Agreement (SLA) within their job scope at power station level

Course Objectives:

On completion of the course, participant will be able to:

  • Define PPA and SLA
  • Explain differences between PPA and SLA
  • Explain the distinctive terms of SLA
  • Describe the types of SLA payment
  • Explain operation requirement
  • Describe the commercial requirement
  • State the penalty for SLA incompliances

for any enquiries please contact:

1. NAME: IR. YEOH CHIEN WERN
     Email: yeohcw@tnb.com.my

2. NAME: MOHD KHAIRUL FIKRI B. MOHD SALLEH
     Email: khairul.fikri@tnb.com.my
 



Target Participant: TT11 - 13
Duration: 2 Days
Language:

RM 3.6K
Power Purchase Agreement (PPA) / Service Level Agreement…
Power & Energy

2 Days

View Details

Overview:
This course offers to participants for adhere and comply the requirement of Power Purchase Agreement (PPA) / Service Level Agreement (SLA). Its consists of introduction to PPA / SLA; SLA salient term; SLA for thermal plant; SLA for hydro plant; operation requirement including declaration and reporting; commercial requirement including commercial term (e.g. Capacity Rate Financial, Fixed Operating  Rate, Variable Operating Rate) and billings (e.g. Energy Payment, Capacity Payment); SLA other requirements such as penalty (e.g. Failure Despatch Instruction) and case study.

Participant will be taken through the vast experience of this course. The emphasis is on participants continuing participation in ensuring the ultimate success of the courses.
Objective:
Terminal Objective:

Participants will be able to adhere and comply correctly the requirements of Power Purchase Agreement (PPA) / Service LevelnAgreement (SLA) within their job scope at power station level

Course Objectives:

  • On completion of the course, participant will be able to:
  • Define PPA and SLA
  • Explain differences between PPA and SLA
  • Explain the distinctive terms of SLA
  • Describe the types of SLA payment
  • Explain operation requirement
  • Describe the commercial requirement
  • State the penalty for SLA incompliances

for any enquiries please contact:

1. NAME: IR. YEOH CHIEN WERN
   Email: yeohcw@tnb.com.my

2. NAME: MOHD KHAIRUL FIKRI BIN MOHD SALLEH
   Email: khairul.fikri@tnb.com.m

Target Participant: TNB Generation Technician TT11-TT13 & those who are interested to deepen their knowledge about the subject
Duration: 2 Days
Language:

RM 3.6K
Power System Parameter Control
Power & Energy

4 Days

View Details

Overview:
The course is to improve participant’s to control generator load governor and system frequency, control Excitation system and system voltage. The trainers will guide and facilitate the participants, so that they can to improve their ability to manage control the power system parameter.

The training format are theory and practical, whereby the participants will be actively involved in the class activitie to increase their confidence level.
Objective:
After attending this training program, participants will be able to:

·         Describe electrical power generation and related electrical parameters in power plant
·         Describe excitation system
·         Describe MVAR and System Voltage
·         Describe generator load governor and system frequency relationship in electrical island
·         Explain synchronizing generator
 
accurately by referring to slides / notes given.


for any enquiries please contact:

1. NAME: ABDUL HISHAM ABDUL HALIM
   Email: ahisham.ahalim@tnb.com.my

2. NAME: YEOH CHIEN WERN
   Email: yeohcw@tnb.com.my

Target Participant: TNB Generation Technician - TT11-14 (Generation Operation-Thermal) & TT07-14 (Generation Operation-Hydro)
Duration: 4 Days
Language:

RM 3.6K
Pressure Vessel Inspection - ASME and API Standard…
Power & Energy

3 Days

View Details

Overview:
This course is designed to explain the basic criteria for Pressure Vessel Inspection requirement that affect procedure and its performance. Participants will be guided in reviewing the inspection in accordance with the requirements of ASME Pressure Vessel Codes (BPVC) and API Codes and Standards.

The training format is theory and practical, where the participants will be actively involved in the class & practical activities. Hence, it will increase their confidence level.

Participant will be taken through the vast experience of Inspection procedure by the trainers. The emphasis is on participants continuing participation in ensuring the ultimate success of the course.
Objective:
At the end of the course, participants will be able to:

1. Recognize the technical codes and standards in designing and maintaining pressure vessel at site.
2. The responsibilities of QC inspectors into their specific duties and involvement in the inspection activities
3. The use of ASME and API codes and standards.


for any enquiries please contact:

1. NAME: AMIR ABU
   Email: amira@tnb.com.my

Target Participant: TNBG TT11-TT13, Mech. Engineers, Mech. Executives & Welding Practitioners
Duration: 3 Days
Language: English, Malay

RM 3.6K
Principles and Applications in Compliance to Malaysian…
Power & Energy

2 Days

View Details

Overview:
MS1525 is important guidelines in sustainable building design and operation that will give positive and direct impact to sustainable energy and energy security in Malaysia. Participants of this training will be exposed theoretically in details on the features present in the Code of Practice and how they can apply it in building design and operation.

Participant will learn on how to do calculation of critical features for comparison between businesses as usual adaptation and / or implementation with the compliance to energy efficient requirements using examples of case studies.
 
Objective:
• To foster interest and build awareness level among the building designers, builders, contractors and building operators on climate change, energy and environmental issues that should encourage to a more serious adoption of MS 1525 Code of Practice in building design and operation
• To provide understanding on how to apply effectively recommended  features set in the Code of Practice
• To provide sufficient information on policies and legislation that support and encourage energy efficient and renewable energy design and operation adoption in new and existing buildings


for any enquiries please contact:

1. NAME: IR. WAN AMINUDDIN BAKI BIN ABDUL KHALID
   Email: aminuddinak@tnb.com.my      
  
2. NAME: ANNAS BIN AHMAD SALLEH
   Email: annass@tnb.com.my
 

Target Participant: Technical & Non-Technical Executive in Government, Government Agencies & Private Sector
Duration: 2 Days
Language:

RM 3.6K
Principles and Operation of Motorised Actuator
Power & Energy

3 Days

View Details

Overview:
The course is designed to improve participant’s skill to maintenance and operation of motorized actuator  in their’s working place.

The training format is on theory and practical, where the participants will be actively involved in the lab activities.

“Learning by doing” is a basic principle adopted in this training. Participant will be taken through the vast experiences of training by the trainer. The emphasis is on participants continuing participation in ensuring the ultimate success in the course.
Objective:
After attending this training program, participants will be able to:

  • Name the parts of motor components.
  • Perform the various motor starter wiring circuits.
  • Identify types of control valve and actuators.
  • Be able to identify motorized actuator component.
  • Understand the principle of motorized valve system.
  • Will be able to do a simple troubleshooting
Without any mistake.


for any enquiries please contact:

1. NAME: IR. YEOH CHIEN WERN
   Email: yeohcw@tnb.com.my

2. NAME: TAN BENG WEE
   Email: tanbw@tnb.com.my

Target Participant: Control & Instrumentation Personnel TT07-TT08 & individuals or technicians involved in maintenance of process measurement
Duration: 3 Days
Language:

RM 3.6K
Programmable Logic Controller (PLC) Maintenance and…
Power & Energy

3 Days

View Details

Overview:
The course is designed to improve participant’s skill to carry out maintenance on the CNI measuring equipment in their’s working place. Trainer will guide and facilitate participants as their doing their practices and observed their safety as part of the training.

The training format is on theory and practical, where the participants will be actively involved in the lab activities. Hence, it will increase their confidence level and safety awareness.
 
“Learning by doing” is a basic principle adopted in this training. Participant will be taken through the vast experiences of training by the trainer.
Objective:
Upon completion of the course, participants will be able to:

  • Explain working principles of a Programmable Logic Controller (PLC)
  • Read common PLC ladder diagram
  • Do common maintenance of a PLC
  • Carry out simple troubleshooting on PLC-related problems


for any enquiries please contact:

1. NAME: IR. YEOH CHIEN WERN
   Email: yeohcw@tnb.com.my

2. NAME: TAN BENG WEE
   Email: tanbw@tnb.com.my

Target Participant: Control & Instrumentation personnel & individuals or technicians involved in maintenance of process measurement
Duration: 3 Days
Language:

RM 3.6K
Pump Maintenance and Technology
Power & Energy

4 Days

View Details

Overview:
The course is designed to improve participant’s knowledge about pump technology and maintenance work related to pumps. The trainers will guide and facilitate the participants through examples and demonstration on real pumps at ILSAS workshop.
 
Participants shall be introduced to various types of pump in a typical power plant along with their respective major components and working principles. Common periodic maintenance is covered along with details on how to determine the size and cutting of packing. Some basic trouble-shooting will also be discussed.
Objective:
Upon completion of this course, participants will be to:

  • Identify and state different types of pumps
  • Explain and interpret important of hydraulic characteristics of pumps
  • Perform repacking of pump stuffing box
  • Perform routine and overhaul maintenance on centrifugal pumps
  • Trouble shoots pump problems
 

Target Participant: Engineer & Exec
Duration: 4 Days
Language: English, Malay

RM 3.6K
Pump Maintenance Technology
Power & Energy

4 Days

View Details

Overview:
The course is designed to improve participant’s knowledge about pump technology and maintenance work related to pumps. The trainers will guide and facilitate the participants through examples and demonstration on real pumps at ILSAS workshop.

Participants shall be introduced to various types of pump in a typical power plant along with their respective major components and working principles. Common periodic maintenance is covered along with details on how to determine the size and cutting of packing. Some basic trouble-shooting will also be discussed.
Objective:
Upon completion of this course, participants will be to:

• Identify and state different types of pumps
• Explain and interpret important of hydraulic characteristics of pumps
• Perform repacking of pump stuffing box
• Perform routine and overhaul maintenance on centrifugal pumps
• Trouble shoots pump problems


for any enquiries please contact:

1. NAME: CHOOI WAI MUN
   Email: chooiwm@tnb.com.my

2. NAME: JALIL ARRIFIN
   Email: jalila@tnb.com.my

Target Participant: Mechanical TNBG Technician TT09-TT12
Duration: 4 Days
Language: English, Malay

RM 3.6K
Radiography Interpretation
Power & Energy

3 Days

View Details

Overview:
This course is designed to explain the basic criteria for provide better understanding of the philosophy and principles of industrial radiography and radiographic interpretation, Interpret radiographic films in accordance to appropriate codes & standards and Identify various types of discontinuities and defects presented in the radiographic films.

The training format is theory and practical, where the participants will be actively involved in the class & workshop activities. Hence, it will increase their confidence level.

Participant will be taken through the vast experience of industrial radiography interpretation procedure and performance by the trainers. The emphasis is on participants continuing participation in ensuring the ultimate success of the course.
 
Objective:
After attending this training program, participants will be able to:

1. Provide better understanding of the philosophy and principles of industrial radiography and radiographic interpretation. 
2. Interpret radiographic films in accordance to appropriate codes & standards.
3. Identify various types of discontinuities and defects presented in the radiographic films.


for any enquiries please contact:

1. NAME: AMIR ABU
   Email: amira@tnb.com.my
 

Target Participant: Technicians, Mech. Engineers, Mech. Executives & Mech. Non-Executives
Duration: 3 Days
Language:

RM 3.6K
Radiography Interpretation
Power & Energy

3 Days

View Details

Overview:
This course is designed to explain the basic criteria for provide better understanding of the philosophy and principles of industrial radiography and radiographic interpretation, Interpret radiographic films in accordance to appropriate codes & standards and Identify various types of discontinuities and defects presented in the radiographic films.

The training format is theory and practical, where the participants will be actively involved in the class & workshop activities. Hence, it will increase their confidence level.

Participant will be taken through the vast experience of industrial radiography interpretation procedure and performance by the trainers. The emphasis is on participants continuing participation in ensuring the ultimate success of the course.
Objective:
After attending this training program, participants will be able to:

1. Provide better understanding of the philosophy and principles of industrial radiography and radiographic interpretation.
2. Interpret radiographic films in accordance to appropriate codes & standards.
3. Identify various types of discontinuities and defects presented in the radiographic films.


for any enquiries please contact:

1. NAME: AMIR ABU
  Email: amira@tnb.com.my

Target Participant: Technicians, Mech. Engineers, Mech. Executives & Mech. Non-Executives
Duration: 3 Days
Language: English, Malay

RM 3.6K
Renewable Energy
Power & Energy

2 Days

View Details

Overview:
Renewable energy is an energy that is derived from natural processes (e.g. sunlight and wind) that are replenished at a higher rate than they are consumed. Solar, wind, geothermal, hydro, and biomass are common sources of renewable energy.

“Learning by doing” is a basic principle adopted in this training. Participant will be taken through the vast experience of training by the trainers. The emphasis is on participants continuing participation in ensuring the ultimate success of the course.
 
Objective:
Upon completion of this course, participants will be able to:

• Discuss RE technologies with appropriate use of technical terms
• Understand research and evaluate RE options
• Establish criteria for successful RE adoption and integration into existing power structure


for any enquiries please contact:

1. NAME: IR. WAN AMINUDDIN BAKI BIN ABDUL KHALID
   Email: aminuddinak@tnb.com.my
  
2. NAME: ANNAS BIN AHMAD SALLEH
   Email: annass@tnb.com.my
 

Target Participant: Engineer, Chemist, Energy Manager, Environment Officer, Power Utility Executives, Occupational Safety & Health Officers & Governmental Officials
Duration: 2 Days
Language: English, Malay

Human Resource Minister - Training Provider Award 2007
Role Model Company 2013 for Electrical Training Programmes by Manpower Department (JTM)
Energy Industry Award: Training Institution Excellence 2011

TNB Integrated Learning Solution Sdn Bhd - ILSAS
Jalan IKRAM-UNITEN, Karung Berkunci 205,
43650 Bandar Baru Bangi, Selangor, MALAYSIA

T: (+6) 03-8922 7222 F: (+6) 03-8926 4437 E: infoilsas@tnb.com.my

© 2017 TNB ILSAS