Power & Energy

RM 3.6K
Accident Investigation
Power & Energy

2 Days

View Details

Overview:
This course is designed to explain the fundamentals of accident investigation & reporting in accordance to Factory & Machinery Act 139 (1967), Occupational Safety & Health Act 514 (1994) and Electricity Supply Act 447 (1990). Participants will be introduced and guided in all the necessary aspects pertaining to the accident investigation & reporting.
The training format is mainly theoretical and case study, where the participants will be actively involved in the class & discussion activities. Hence, it will increase their confidence level in performing accident investigation & reporting.
Participant will be taken through the vast experience of accident investigation & reporting by the trainer. The emphasis is on participants continuing participation in ensuring the ultimate success of the course.
Objective:
After attending this training program, participants will be able to:

  • Manage The Accident Investigation.
  • Practice The Principle of Accident Investigation & Procedures.
  • Analyze Data of Accident.
  • Comply with The Notification of Accident, Dangerous Occurrences, Occupational Poisoning and Diseases (NADOPOD - OSHA Regulation 2004).


Target Participant: OPEN
Duration: 2 Days
Language: English, Malay

RM 3.6K
Air Condition Maintenance Technology
Power & Energy

4 Days

View Details

Overview:
This course is designed to explain the basic criteria for Air Condition System that affects procedure and performance. Participants will be guided in reviewing the Air Condition System Maintenance in accordance with the requirements of American Society of Heating Refrigerating Conditioning Engineers (ASHRAE) in power plant practice.

The training format is theory and practical, where the participants will be actively involved in the class & practical activities. Hence, it will increase their confidence level.

Participant will be taken through the vast experience of Air Conditioning procedure and performance by the trainers. The emphasis is on participants continuing participation in ensuring the ultimate success of the course.
Objective:
After attending this training program, participants will be able to:

  1. State the basic principle of air conditioning
  2. Explain various type of air conditioning system
  3. Carry out maintenance of air conditioning system
  4. Troubleshoot problem


for any enquiries please contact:

1. NAME: AMIR ABU
   Email: amira@tnb.com.my

Target Participant: TNBG TT11-TT13, Mech. Engineers, Mech. Executives & Supervisors / Operators
Duration: 4 Days
Language: English, Malay

RM 3.6K
Anti-Friction Bearing
Power & Energy

3 Days

View Details

Overview:
This course is designed to explain the basic criteria for Anti Friction Bearing that affects procedure and performance. Participants will be guided in reviewing the Anti-Friction Bearing in accordance with the requirements of ISO Standard in power plant practice.

The training format is theory and practical, where the participants will be actively involved in the class & practical activities. Hence, it will increase their confidence level.

Participant will be taken through the vast experience of Anti Friction procedure and performance by the trainers. The emphasis is on participants continuing participation in ensuring the ultimate success of the course.
Objective:
After attending this training program, participants will be able to:

  1. Identify of various types of bearing and their application.
  2. Identify the types of fits and tolerances required for roller bearings.
  3. Perform bearing mounting and dismounting using various methods.
  4. Identify the types of lubrication and lubricating methods.
  5. State the various types of bearing failure and remedies.


for any enquiries please contact:

1. NAME: AMIR ABU
   Email: amira@tnb.com.my

Target Participant: TNBG TT05-TT13, Mech. Engineers, Mech. Executives & Supervisors / Operators
Duration: 3 Days
Language: English, Malay

RM 3.6K
Aturan Keselamatan (Penjanaan) / TNBG Safety Rules
Power & Energy

3 Days

View Details

Overview:
 
This course is designed to explain the fundamentals of TNBG Safety Rules. Participants will be introduced to these rules, covering all the necessary sections pertaining to the safety rules in TNBG power plant.

The training format is mainly theoretical, where the participants will be actively involved in the class & discussion activities. Hence, it will increase their confidence level in reviewing this TNBG Safety Rules.

Participant will be taken through the vast experience of safety rules by the trainer. The emphasis is on participants continuing participation in ensuring the ultimate success of the course.
Objective:
After attending this training program, participants will be able to:

  • Recognize and practice TNBG Safety Regulations (Mechanical) effectively.
  • State the Authorized Person and Competent Person.
  • State the procedure of issuance of Permit to Work.
  • State the Safety Rules for work on Mechanical Plant.


for any enquiries please contact:

1. NAME: CHOOI WAI MUN
   Email: chooiwm@tnb.com.my

Target Participant: TNB Engineers, TNB Executives & TNB Non-Executives
Duration: 3 Days
Language: English, Malay

RM 3.6K
Automatic Motor Control
Power & Energy

5 Days

View Details

Overview:
This course provides an overview of the automatic motor control system applications, hands-on hard-wiring installation and troubleshooting motor control circuit. The targeted audience of this course are power plant electrical engineers, facility engineers and technical supervisors, shift engineers and plant operators whose jobs involve in electrical installation. The goal of this course is to create a fundamental knowledge of the core concepts industry type motor starters, including: read sequential control circuit, install motor starters’ components and troubleshoot power and control circuits of motor starters.

The training methodology is theory and practical, where the participants will be actively involved in the hands-on activities. At the end of the course, participants will be able to install and trouble shoot automatic motor control system.
Objective:
Upon completion of this course, participants will be able to :

  • Do installation of automatic motor starter
  • Read sequential control circuit
  • Troubleshoot power & control circuits of motor starter


for any enquiries please contact:

1. NAME: YEOH CHIEN WERN
   Email: yeohcw@tnb.com.my

2. NAME: SOH LEY BAU
   Email: sohlb@tnb.com.my

Target Participant: Electrical Supervisor, Engineer, Electrical Technician & Plant Operator
Duration: 5 Days
Language: English

RM 3.6K
Automatic Motor Control
Power & Energy

3 Days

View Details

Overview:
This course provides an overview of the automatic motor control system applications, hands-on hard-wiring installation and troubleshooting motor control circuit. The targeted audience of this course are power plant electrical engineers, facility engineers and technical supervisors, shift engineers and plant operators whose jobs involve in electrical installation. The goal of this course is to create a fundamental knowledge of the core concepts industry type motor starters, including: read sequential control circuit, install motor starters’ components and troubleshoot power and control circuits of motor starters.

The training methodology is theory and practical, where the participants will be actively involved in the hands-on activities. At the end of the course, participants will be able to install and trouble shoot automatic motor control system.
Objective:
Upon completion of this course, participants will be able to:

  • Do installation of automatic motor starter
  • Read sequential control circuit
  • Troubleshoot power & control circuits of motor starters


for any enquiries please contact:

1. NAME: YEOH CHIEN WERN
   Email: yeohcw@tnb.com.my

2. NAME: SOH LEY BAU
   Email: sohlb@tnb.com.my

Target Participant: TNBG Technician TT11-TT13 & Plant Operator
Duration: 3 Days
Language: English, Malay

RM 3.6K
Basic Electrical, Control and Instrumentation
Power & Energy

5 Days

View Details

Overview:
The course is designed to improve participant’s skill to carry out basic electrical and basic control instrumentation in theirs working place. Trainer will guide and facilitate participants as their doing their practices and observed their safety as part of the training.

The training format is on theory and practical, where the participants will be actively involved in the lab activities. Hence, it will increase their confidence level and safety awareness.

“Learning by doing” is a basic principle adopted in this training. Participant will be taken through the vast experiences of training by the trainer. The emphasis is on participants continuing participation in ensuring the ultimate success in the course.
Objective:
Upon completion of this workshop, participants will be able to:

  • Explain and identify basic electrical quantity and units.
  • Explain and identify basic electrical application in analyzing dc and ac circuit.
  • Interpret plant symbols.
  • Identify symbols of measuring sensors, pneumatic, and hydraulic systems.


for any enquiries please contact:

1. NAME: IR. YEOH CHIEN WERN
   Email: yeohcw@tnb.com.my

2. NAME: TAN BENG WEE
   Email: tanbw@tnb.com.my

Target Participant: C&I personnel TT05-TT09 & individuals or technicians involved in electrical work
Duration: 5 Days
Language:

RM 3.6K
Basic Instrumentation for Peronda
Power & Energy

2 Days

View Details

Overview:
The course is designed to improve participant’s skill to carry out the concepts of basic instrumentation in theirs working place. Trainer will guide and facilitate participants as their doing their practices and observed their safety as part of the training.

The training format is on theory and practical, where the participants will be actively involved in the lab activities. Hence, it will increase their confidence level and safety awareness.

“Learning by doing” is a basic principle adopted in this training. Participant will be taken through the vast experiences of training by the trainer. The emphasis is on participants continuing participation in ensuring the ultimate success in the course.
Objective:
Upon completion of this workshop, participants will be able to:

• Describe the four parameters for process instrumentation in their working place
• Interpret plant symbols
• Identify symbols of measuring sensors, pneumatic, and hydraulic systems


for any enquiries please contact:

1. NAME: IR. YEOH CHIEN WERN
     Email: yeohcw@tnb.com.my

2. NAME: TAN BENG WEE
     Email: tanbw@tnb.com.my
 

Target Participant: Operation Personnel's TT07
Duration: 2 Days
Language:

RM 3.6K
Basic Logic Diagrams
Power & Energy

3 Days

View Details

Overview:

It is a topic that  will enable operators to identify, determine, explain and develop a logic diagram through the process of loop symbols in the relevant operation of power plant.

The significance of these logic symbology, truth table, time delay devices, basic automatic plant control will enable the operators to justify the correct operation processes of the power plant equipment.


Objective:

Terminal Objective:

Given with the logic diagram and loop symbols, participant will be able to explain the basic logic diagrams without mistake.

Course Objectives:

On completion of the course, participants will be able to identify, explain and develop:

  • logic diagram
  • operation of three types time delay devices
  • truth table for the logic gates
  • output of each component of the logic circuit


for any enquiries please contact:

1. NAME: IR. YEOH CHIEN WERN
     Email: yeohcw@tnb.com.my

2. NAME: MOHD KHAIRUL FIKRI B. MOHD SALLEH
     Email: khairul.fikri@tnb.com.my
 



Target Participant: TT11 - 13
Duration: 3 Days
Language:

RM 3.6K
Basic Logic Diagrams
Power & Energy

3 Days

View Details

Overview:
It is a topic that will enable operators to identify, determine, explain and develop a logic diagram through the process of loop symbols in the relevant operation of power plant. The significance of these  logic symbology, truth table, time delay devices, basic automatic plant control will enable the operators to justify the correct operation processes of the power plant equipment.
Objective:
Terminal Objective:

Given with the logic diagram and loop symbols, participant will be able to explain the basic logic diagrams without mistake.

Course Objectives:

On  completion  of  the  course,  participants  will  be  able  to  identify, explain and develop:

  • Logic diagram
  • Operation of three types time delay devices
  • Truth table for the logic gates
  • Output of each component of the logic circuit

for any enquiries please contact:

1. NAME: IR. YEOH CHIEN WERN
   Email: yeohcw@tnb.com.my

2. NAME: MOHD KHAIRUL FIKRI BIN MOHD SALLEH
   Email: khairul.fikri@tnb.com.my

Target Participant: Individuals / executives involved in Power Plant Operations especially Operators of TT11-TT14
Duration: 3 Days
Language:

RM 3.6K
Basic Piping and Fittings
Power & Energy

3 Days

View Details

Overview:
This course is designed to explain the basic criteria for Basics of Piping Component and Design. Participants will be guided in reviewing the Piping Procedure Specification in accordance with the requirements of British standard and others relevant standards in power plant practice.

The training format is theory and practical, where the participants will be actively involved in the class & practical activities. Hence, it will increase their confidence level.

Participant will be taken through the vast experience of piping procedure and performance by the trainers. The emphasis is on participants continuing participation in ensuring the ultimate success of the course.
Objective:
After attending this training program, participants will be able to:

  • Identify different types of pipes
  • Explain why different pipes used in different system
  • Make a field check of a piping system
  • Identify and describe various tools used in pipe work
  • To list various types of pipe support system


for any enquiries please contact:

1. NAME: AMIR ABU
   Email: amira@tnb.com.my

Target Participant: TNBG (TT05-TT08) & Staf TNBG
Duration: 3 Days
Language: English, Malay

RM 3.6K
Basic Pneumatic & Hydraulic
Power & Energy

2 Days

View Details

Overview:
The course is designed to improve participant’s skill to Basic Pneumatic & Hydraulic instrument in their’s working place.

The training format is on theory and practical, where the participants will be actively involved in the lab activities.

“Learning by doing” is a basic principle adopted in this training. Participant will be taken through the vast experiences of training by the trainer. The emphasis is on participants continuing participation in ensuring the ultimate success in the course.
Objective:
After attending this training program, participants will be able to:

  • Explain the basic concepts and operation of pneumatic and Hydraulic.
  • Identify the common components in a pneumatic and hydraulic system.
  • Explain the basic arrangement of pneumatic and hydraulic components.
  • Interpret plant symbols.
Without any mistake.


for any enquiries please contact:

1. NAME: IR. YEOH CHIEN WERN
   Email: yeohcw@tnb.com.my

2. NAME: TAN BENG WEE
   Email: tanbw@tnb.com.my

Target Participant: Control & Instrumentation personnel TT05-TT06 & individuals or technicians involved in maintenance of process measurement
Duration: 2 Days
Language: English, Malay

RM 3.6K
Basic Power Plant Electrical Distribution System
Power & Energy

2 Days

View Details

Overview:
This course provides an overview of electrical distribution system in power plant.The goal of this course is to create a fundamental knowledge of the core concepts and function of each component in electrical distribution system. The targeted audience of this course are power plant electrical engineers, facility engineers and technical supervisors, shift engineers and plant operators whose jobs involve in power plant environment.
Objective:
After attending this training program, participants will be able to:

  • Conduct required breaker maintenance and testing
  • Locate and rectify incoming supply
  • Describe the standard practice of breaker operations
  • Describe shutdown procedure of electrical distribution


for any enquiries please contact:

1. NAME: YEOH CHIEN WERN
   Email: yeohcw@tnb.com.my

2. NAME: SOH LEY BAU
   Email: sohlb@tnb.com.my

Target Participant: TNB Generation Technician Grade TT05-TT10 & Engineers
Duration: 2 Days
Language: English, Malay

RM 3.6K
Bearing and Lubrication
Power & Energy

3 Days

View Details

Overview:
This course is designed to explain the basic criteria for Bearing and Lubrication that affect procedure and performance. Participants will be guided in reviewing the Bearing & Lubrication in accordance with the requirements of ISO Standard in Power Plant Practice.

The training format is theory and practical, where the participants will be actively involved in the class & practical activities. Hence, it will increase their confidence level.

Participant will be taken through the vast experience of Bearing and Lubrication procedure and performance by the trainers. The emphasis is on participants continuing participation in ensuring the ultimate success of the course.
Objective:
After attending this training program, participants will be able to:

1.Identify of various types of bearing and their application.
2.Identify the types of fits and tolerances required for roller bearings.
3.Perform bearing mounting and dismounting using various methods.
4.Identify the types of lubrication and lubricating methods.


for any enquiries please contact:

1. NAME: AMIR ABU
   Email: amira@tnb.com.my

Target Participant: TNBG TT05-TT13, Mech. Engineers, Mech. Executives & Supervisors / Operators
Duration: 3 Days
Language: English, Malay

RM 3.6K
Bearing Technology
Power & Energy

4 Days

View Details

Overview:
This course is designed to explain the basic criteria for Bearing Technology that affects procedure and performance. Participants will be guided in reviewing the Bearing Technology according to ISO Standard & Power Plant Practice.

The training format is theory and practical, where the participants will be actively involved in the class & workshop activities. Hence, it will increase their confidence level.

Participant will be taken through the vast experience of Bearing Technology and performance by the trainers. The emphasis is on participants continuing participation in ensuring the ultimate success of the course.
Objective:
At the end of the course, participants will be able to:

1.Identify various type, design and construction of journal and thrust bearing and their application
2.Identify the material and alloy selection
3.Perform NDT Test on journal bearing (PT and UT) in accordance to ISO 4386-1 & -3
4.Perform bearing inspection and maintenance :
          i.bearing side clearance
          ii.bearing top clearance
          iii.bearing wear check
          iv.bearing contact check
          v.bearing scraping


for any enquiries please contact:

1. NAME: AMIR ABU
   Email: amira@tnb.com.my

Target Participant: TNBG TT05-TT13, Mech. Engineers, Mech. Executives & Welding Practitioners
Duration: 4 Days
Language: English, Malay

RM 3.6K
Black Start / Black Out & Islanded Operation
Power & Energy

3 Days

View Details

Overview:
The course is designed to improve participant’s knowledge and skill to work out on:

  • Grid system and load profile
  • Black out and consequences
  • Black start procedure and protocol
  • Islanding operation procedure
  • Case study for islanding operation
  • Single line diagram of power plant blackstart facility
  • Emergency Response Plan (ERP) for blackout and emergency

The trainers will guide and facilitate the participants. The training format is theoretical and case study reviews.
Objective:
Upon completion of this course, participants will be able to:
  • Understand the concept of island operation in grid system
  • Explain the single line diagram of power plant blackstart facility and its local network interconnection
  • Define blackout and plant safe shutdown or house load operation
  • Explain station black start facilities
  • Understand and aware of Emergency Response Plan (ERP) for blackout and emergency

Accurately by referring to slides/notes given.


for any enquiries please contact:

1. NAME: ABDUL HISHAM ABDUL HALIM
   Email: ahisham.ahalim@tnb.com.my

2. NAME: YEOH CHIEN WERN
   Email: yeohcw@tnb.com.my

Target Participant: TNB Generation Technician TT11-TT14 (Generation Operation-Thermal) & TT07-TT14 (Generation Operation-Hydro)
Duration: 3 Days
Language:

RM 3.6K
Blackstart / Blackout and Islanded Operation
Power & Energy

3 Days

View Details

Overview:

The course is designed to improve participant’s knowledge and skill to work out on:

• Grid system and load profile
• Black out and consequences
• Black start procedure and protocol
• Islanding operation procedure
• Case study for islanding operation
• Single line diagram of power plant blackstart facility
• Emergency Response Plan (ERP) for blackout and emergency

The trainers will guide and facilitate the participants. The training format is theoretical and case study reviews.


Objective:

Upon completion of this course, participants will be able to:

• Understand the concept of island operation in grid system
• Explain the single line diagram of power plant blackstart facility and its local network interconnection
• Define blackout and plant safe shutdown or house load operation
• Explain station black start facilities.
• Understand and aware of Emergency Response Plan (ERP) for blackout and emergency

accurately by referring to slides/notes given.


for any enquiries please contact:

1. NAME: ABDUL HISHAM ABDUL HALIM
     Email: ahisham.ahalim@tnb.com.my

2. NAME: YEOH CHIEN WERN
     Email: yeohcw@tnb.com.my
 
 

 



Target Participant: TT 11-13 (Thermal) TT 07-13 (Hydro)
Duration: 3 Days
Language:

RM 3.6K
Boiler, Steam Turbine, Gas Turbine and Hydro Maintenance
Power & Energy

4 Days

View Details

Overview:
The workshop is designed to improve participant’s knowledge to handle maintenance work at all power plants available at TNB. Subjects are namely boiler, steam turbine, gas turbine, & hydro.

Topics covered are under thermal plants are Boiler Essential Fittings, Boiler Major Components, Boiler Water Treatment Basics, Steam Turbine Method of Reducing Rotor Speed, Steam Turbine Periodical Inspection, and Steam Turbine Main Components.

Other subjects Gas Power Plant are Gas Turbine Maintenance Inspections, and Gas Turbine Distinctive Features. For Hydro Plants subjects covered are Hydro Turbine Types, Hydraulic Principles, Hydro Turbine Maintenance & Centering.
Objective:
Upon completion of this workshop, participants will be:

  • Explain the basic function of a boiler, steam turbine, gas turbine, & hydro
  • Name & explain the function of main components in a boiler, steam turbine, gas turbine, & hydro
  • Explain alignment, centering & balancing concepts in steam turbines, and hydro turbines
  • Explain the importance of clean boiler water, and the requirements of 13 boiler essential fittings


for any enquiries please contact:

1. NAME: CHOOI WAI MUN
   Email: chooiwm@tnb.com.my

2. NAME: JALIL ARRIFIN
   Email: jalil@tnb.com.my

Target Participant: Mechanical TNBG Technician TT09
Duration: 4 Days
Language: English, Malay

RM 3.6K
Breaker Maintenance and Breaker Protection
Power & Energy

2 Days

View Details

Overview:

This 2-day course is designed for electrical technician, supervisor, or engineer who are interested in the application, maintenance and testing issues related to low voltage switchboard. The theory of routine testing, troubleshooting and maintenance of circuit breakers are thoroughly covered. The course also includes practical  training to operate and shut down low voltage switchboard in accordance with Electrical Act 1990. 


Objective:
After attending this training program, participants will be able to:
  • Explain the components of breaker
  • Perform the testing on the breaker
  • Explain types of breaker
  • List down breaker maintenance


for any enquiries please contact:

1. NAME: YEOH CHIEN WERN
   Email: yeohcw@tnb.com.my

2. NAME: SOH LEY BAU
   Email: sohlb@tnb.com.my

Target Participant: TNBG Technician TT09-TT10 & Engineer
Duration: 2 Days
Language: English, Malay

RM 3.6K
Calibration & Maintenance of Control Drive and PID…
Power & Energy

3 Days

View Details

Overview:
The course is designed to improve participant’s skill on Calibration and maintenance of Control Drive and also basic knowledge on PID tuning in their’s working place.

The training format is on theory and practical, where the participants will be actively involved in the lab activities.

“Learning by doing” is a basic principle adopted in this training. Participant will be taken through the vast experiences of training by the trainer. The emphasis is on participants continuing participation in ensuring the ultimate success in the course.
Objective:
After attending this training program, participants will be able to:
 
• Identify types of control valves and actuators.
• Calibrate and maintain pneumatic valve actuators.
• Calibrate valve positioner.
• Troubleshoot valve system common problems.
• Describe the basic concepts of automatic control.
• Tune PID (proportional, integral, and derivative) process controller.
• Demonstrate understanding in operation of an auto control system.
• Identify and explain the basis of control actions.
• Tune PID (proportional, integral, and derivative) process controller

Without any mistake.


for any enquiries please contact:

1. NAME: IR. YEOH CHIEN WERN
   Email: yeohcw@tnb.com.my

2. NAME: TAN BENG WEE
   Email: tanbw@tnb.com.my

Target Participant: Control & instrumentation personnel & Engineers involved in maintenance of process measurement
Duration: 3 Days
Language:

RM 3.6K
Calibration and Instrumentation
Power & Energy

3 Days

View Details

Overview:
The course is designed to improve participant’s skill to Calibration and maintenance of measuring instrument in their’s working place.

The training format is on theory and practical, where the participants will be actively involved in the lab activities.

“Learning by doing” is a basic principle adopted in this training. Participant will be taken through the vast experiences of training by the trainer. The emphasis is on participants continuing participation in ensuring the ultimate success in the course.
Objective:
After attending this training program, participants will be able to:

  • Explain and do the calculation of basic calibration
  • Explain the principal of measurements.
  • Know and differentiate the function of measuring equipments / instruments.
  • Do the calibration work.
Without any mistake.


for any enquiries please contact:

1. NAME: TAN BENG WEE
   Email: tanw@tnb.com.my

Target Participant: Control & Instrumentation personnel TT09-TT10 & individuals or technicians involved in maintenance of process measurement
Duration: 3 Days
Language: English, Malay

RM 3.6K
Calibration and Maintenance of Control Drive and PID…
Power & Energy

3 Days

View Details

Overview:
The course is designed to improve participant’sskillonCalibration and maintenanceof Control Drive and also basic knowledge on PID tuning in their’s working place.

The training format is on theory and practical, where the participants will be actively involved in the lab activities.

“Learning by doing” is a basic principle adopted in this training. Participant will be taken through the vast experiences of training by the trainer. The emphasis is on participants continuing participation in ensuring the ultimate success in the course.
Objective:
After attending this training program, participants will be able to:
 
• Identify types of control valves and actuators.
• Calibrate and maintain pneumatic valve actuators.
• Calibrate valve positioner.
• Troubleshoot valve system common problems.
• Describe the basic concepts of automatic control.
• Tune PID (proportional, integral, and derivative) process controller.
• Demonstrate understanding in operation of an auto control system.
• Identify and explain the basis of control actions.
• Tune PID (proportional, integral, and derivative) process controller.

Without any mistake.


for any enquiries please contact:

1. NAME: IR. YEOH CHIEN WERN
     Email: yeohcw@tnb.com.my

2. NAME: TAN BENG WEE
     Email: tanbw@tnb.com.my

 

Target Participant: Control and Instrumentation Personnel, Engineers involved in maintenance of process measurement
Duration: 3 Days
Language:

RM 3.6K
Calibration and Maintenance of Control Drive and PID…
Power & Energy

3 Days

View Details

Overview:
The course is designed to improve participant’s skill on Calibration and maintenance of Control Drive and also basic knowledge on PID tuning in their’s working place.

The training format is on theory and practical, where the participants will be actively involved in the lab activities.

“Learning by doing” is a basic principle adopted in this training. Participant will be taken through the vast experiences of training by the trainer. The emphasis is on participants continuing participation in ensuring the ultimate success in the course.
Objective:
After attending this training program, participants will be able to:
 
• Identify types of control valves and actuators.
• Calibrate and maintain pneumatic valve actuators.
• Calibrate valve positioner.
• Troubleshoot valve system common problems.
• Describe the basic concepts of automatic control.
• Tune PID (proportional, integral, and derivative) process controller.
• Demonstrate understanding in operation of an auto control system.
• Identify and explain the basis of control actions.
• Tune PID (proportional, integral, and derivative) process controller

Without any mistake.

for any enquiries please contact:

1. NAME: IR. YEOH CHIEN WERN
   Email: yeohcw@tnb.com.my

2. NAME: TAN BENG WEE
   Email: tanbw@tnb.com.my

Target Participant: C & I personnel, Engineers involved in maintenance of process measurement
Duration: 3 Days
Language:

RM 3.6K
Calibration and Maintenance of Control Valve
Power & Energy

3 Days

View Details

Overview:
The course is designed to improve participant’s skill to Calibration and maintenance of Control Valve in their’s working place.

The training format is on theory and practical, where the participants will be actively involved in the lab activities.

“Learning by doing” is a basic principle adopted in this training. Participant will be taken through the vast experiences of training by the trainer. The emphasis is on participants continuing participation in ensuring the ultimate success in the course.
Objective:

  • Identify types of control valves and actuators.
  • Calibrate and maintain pneumatic and motorized valve actuators.
  • Calibrate valve positional, feedback transmitter and limit switches.
  • Troubshoot valve system common problems.


for any enquiries please contact:

1. NAME: IR. YEOH CHIEN WERN
   Email: yeohcw@tnb.com.my

2. NAME: TAN BENG WEE
   Email: tanbw@tnb.com.my

Methodology: presentation, discussion, demonstration
Prerequisites:
Target Participant: Control & Instrumentation personnel TT09-TT10 & individuals or technicians involved in maintenance of process measurement
Duration: 3 Days
Language: English, Malay

RM 3.6K
Calibration of Measuring Instruments
Power & Energy

3 Days

View Details

Overview:
The course is designed to improve participant’s skill to Calibration and maintenance of measuring instrument in their’s working place.

The training format is on theory and practical, where the participants will be actively involved in the lab activities.

“Learning by doing” is a basic principle adopted in this training. Participant will be taken through the vast experiences of training by the trainer. The emphasis is on participants continuing participation in ensuring the ultimate success in the course.
Objective:
After attending this training program, participants will be able to:

  • Describe measurement principles of flow, pressure, level, and temperature
  • Calibrate common measuring instruments
  • Maintain certain measuring instruments

Without any mistake.


for any enquiries please contact:

1. NAME: IR. YEOH CHIEN WERN
   Email: yeohcw@tnb.com.my

2. NAME: TAN BENG WEE
   Email: tanbw@tnb.com.my

Target Participant: Control & Instrumentation personnel TT09-TT10 & individuals or technicians involved in maintenance of process measurement
Duration: 3 Days
Language:

RM 3.6K
Cathodic Protection Systems
Power & Energy

1 Day

View Details

Overview:
This 1-day course is designed for electrical engineers, technicians and supervisors who are interested in fundamental Cathodic Protection (CP) systems in power plant. This course provides theoretical aspect of the field equipment used to monitor Cathodic Protection systems and various factors that impact the performance of these system. At the end of the course, participants will achieve sound knowledge in cathodic protection in order to reduce corrosion rate by extending equipment life span, thus reducing cost of the overall corrosion control program.
Objective:
After attending this training program, participants will be able to:

  • Explain the impressed current type cathodic protection
  • Explain sacrificial anode type cathodic protection
  • Explain function of cathodic protection systems

for any enquiries please contact:

1. NAME: YEOH CHIEN WERN
   Email: yeohcw@tnb.com.my

2. NAME: SOH LEY BAU
   Email: sohlb@tnb.com.my

Target Participant: TNBG Technician TT11-TT13 & Engineer
Duration: 1 Day
Language: English, Malay

RM 3.6K
CEPSWAM - Course for Certified Environmental Professional…
Power & Energy

5 Days

View Details

Overview:
Scheduled wastes are by nature very toxic and dangerous. Improper management of such wastes will lead to serious pollution of the environment and the ecosystem as well as immediate / long term impacts to human health. Managing scheduled wastes requires a comprehensive understanding of regulatory framework, waste properties, waste management concepts, and accepted good management practices. EiMAS is providing a training program to train your personnel who are involved in managing scheduled waste to be competent in their job function. The competent person will ensure that scheduled waste on your premises managed properly in accordance with the legal requirements.

This unique training course which focuses on hands-on approach is in fact the only one of its kind in Malaysia. A Certificate of Competency will be awarded to participants who successfully complete the course, pass the examination and submit a field training report.
Objective:
Upon completion of this workshop, participants will be:

  • Explain the legal requirements on scheduled waste management
  • Identify, classify and categorize scheduled waste
  • Implement sound and effective scheduled waste management practices
  • Formulate an implementation plan for full compliance with the regulatory and requirements of the Environmental Quality (Scheduled Wastes Regulations, 2005)


for any enquiries please contact:

1. NAME: IR. WAN AMINUDDIN BAKI BIN ABDUL KHALID
   Email: aminuddinak@tnb.com.my

2. NAME: ANNAS BIN AHMAD SALLEH
   Email: annass@tnb.com.my

Target Participant: Managers / Supervisors who are involved in managing toxic and hazardous waste (scheduled waste) at industrial facilities
Duration: 5 Days
Language: English, Malay

RM 3.6K
Chiller Plant Maintenance
Power & Energy

3 Days

View Details

Overview:
This course will cover basic of air conditioning and refrigeration cycle including centralized systems and its' main components.

Main material of course is to cover the various types, components and maintenance routine for the chiller plant. This detail breakdown into cooling tower systems, heat exchangers, chilled water system, and Air Handling Unit.

Also covered in the material is some basic to control and regulation of the plant, factors affecting plant performance, basic operation readings, and basic safety guidelines.
Objective:

  • Able to state the basic principle of centralized air conditioning system and DCS
  • Able to explain various types of cooling tower working system, compressor used in centralized system, heat exchanger system, chilled water system, and Air Handling Unit – AHU
  • Able to perform some basic maintenance and troubleshooting for air conditioning systems


for any enquiries please contact:

1. NAME: CHOOI WAI MUN
   Email: chooiwm@tnb.com.my

2. NAME: ABDUL RAZAK
   Email: razakm@tnb.com.my

Target Participant: TNBG, TNBT, TNBD, or any personnel in Building Maintenance TT05-TT07
Duration: 3 Days
Language: English, Malay

RM 3.6K
City and Guilds - Coal Fired Power Plant Part 2
Power & Energy

10

View Details

Overview:

Objective:


Target Participant: Non-exec & Exec
Duration: 10
Language:

RM 3.6K
City and Guilds - Coal Fired Power Plant Part 3
Power & Energy

10

View Details

Overview:

Objective:


Target Participant: Non-exec & Exec
Duration: 10
Language:

Human Resource Minister - Training Provider Award 2007
Role Model Company 2013 for Electrical Training Programmes by Manpower Department (JTM)
Energy Industry Award: Training Institution Excellence 2011

TNB Integrated Learning Solution Sdn Bhd - ILSAS
Jalan IKRAM-UNITEN, Karung Berkunci 205,
43650 Bandar Baru Bangi, Selangor, MALAYSIA

T: (+6) 03-8922 7222 F: (+6) 03-8926 4437 E: infoilsas@tnb.com.my

© 2017 TNB ILSAS