OSHE

RM 3.6K
Problem Solving Decision Making
OSHE

3 Days

View Details

Overview:
A problem is the gap between where one is and where one should be. Our challenge is normally to find the correct causes in order to reduce or eliminate the gap. This course enables participants to analyze the problems rationally and thoroughly, minimize the gap, provide possible solutions and generate appropriate action plans to resolve the problem. This course is blended with years of experience producing a hybrid of problem solving and decision making tools and techniques.

“Learning by doing” is a basic principle adopted in this training. The emphasis of this training is for the participants to apply the tools during the workshop and continuously in managing the daily tasks thereafter.
 
Objective:
Given the PSDM tools, participants will be able to:

1. Know how to handle job situations
2. Look at systematic approach to :
   - analyse problems
   - make decisions
   - avoid future problems
3. Ask questions systematically


for any enquiries please contact:

1. NAME: SURINDER KAUR A/P KULDIP SINGH
   Email: surinder@tnb.com.my
 
2. NAME: SITI AISHAH ABDULLAH 
   Email: sitiaishah.abdullah@tnb.com.my
 

Target Participant: TNB Non-Executives
Duration: 3 Days
Language:

RM 3.6K
Procurement Procedure for Executive
OSHE

2 Days

View Details

Overview:
Procurement Policy and Procedures document has been developed to establish the procurement process for Tenaga Nasional Berhad in the spirit of Government Link Companies transformation initiatives. It  provides  a  set  of  general  policy  and  procedures  for  the procurement  of  Supply,  Works  and  Services through a consistent procurement system across all Divisions and Subsidiaries in the Group.
Objective:
Upon completion of this workshop, participants will be:

·  Participants will be able to describe and explain Procurement Policy and Procedures correctly without mistakes.



for any enquiries please contact:

1. NAME: ISMAH BINTI SALLEH
   Email: ismahs@tnb.com.my

Target Participant: Open to All Executive
Duration: 2 Days
Language:

RM 3.6K
Procurement Procedure for Non-Executive
OSHE

2 Days

View Details

Overview:
Kursus  ini  adalah  dirangka  bagi  memberikan  pendedahan  kepada  anggota  berkenaan Proses  &  Prosedur  Perolehan  berdasarkan  Dokumen Dasar  dan  Prosedur  Perolehan  TNB. Dokumen ini  telah  digubal  bagi  menyempurnakan  proses  perolehan  TNB  dalam  menjayakan inisiatif  transformasi  Syarikat  Berkaitan  Kerajaan.  Dokumen  ini  juga  menyediakan  satu garis panduan umum bagi perolehan Pembekalan, Kerja dan Perkhidmatan menerusi satu sistem perolehan yang konsisten di seluruh Bahagian dan Anak Syarikat TNB. Ini  akan membantu anggota  kerja  yang  berkaitan dalam  mempraktikkan tatacara  yang betul dalam proses dan prosedur perolehan TNB.
Objective:
Di akhir kursus para peserta dapat:

·  Menjelaskan Proses Perolehan
·  Menyenaraikan peranan jawatankuasa
·  Melaksanakan tatacara Perolehan di tempat kerja dengan betul


untuk maklumat lanjut sila hubungi:

1. NAME: ISMAH BINTI SALLEH
   Email: ismahs@tnb.com.my

Target Participant: Anggota Kerja Bukan Eksekutif TNB
Duration: 2 Days
Language:

RM 3.6K
Prosedur Kerja Selamat bagi Kerja-Kerja Elektrik (Safe…
OSHE

3 Days

View Details

Overview:
Kursus ini adalah merujuk kepada Buku Panduan Prosedur Kerja Selamat Bagi Kerja-kerja Elektrik yang terbitkan oleh Suruhanjaya Tenaga pada 2013. Kursus ini diadakan bagi memberi pemahaman yang mencukupi kepada Orang Kompeten Suruhanjaya Tenaga dan orang yang terlibat dalam secara langsung atau tidak langsung dengan pemasangan,operasi dan senggaraan sistem bekalan elektrik; untuk dijadikan amalan kerja selamat bagi kerja-kerja elektrik yang dijalankan.
Objective:
Pada akhir kursus ini, peserta kursus dapat memahami dan mengamalkan Panduan Prosedur Kerja Selamat bagi Kerja-kerja Elektrik yang melibatkan sengggaraan dan kendalian pepasangan elektrik.


untuk maklumat lanjut sila hubungi:

1. NAME: SITI RUZAINIDA BINTI IBRAHIM
   Email: ruzainidai@tnb.com.my

2. NAME: FARAH IZYAN ABDUL LATIF
   Email: izyanal@tnb.com.my        
 
3. NAME: MOHD AIDY AWALUDDIN
   Email: aidy@tnb.com.my
 

Target Participant: Orang Kompeten Suruhanjaya Tenaga & Orang yang bekerja di dalam bidang yang berkaitan dengan pepasangan elektrik
Duration: 3 Days
Language:

RM 3.6K
Prosedur Tatatertib & Kod Etika TNB
OSHE

3 Days

View Details

Overview:
Kursus ini dirangka khas untuk memberi pengetahuan kepada para penyelia TNB tentang caracara mengenali dan menganalisa salah laku atau perlanggaran kontrak perkhidmatan di tempat kerja,  serta  tindakan  yang  betul  yang  perlu  diambil,  dengan  merujuk  kepada  buku  Prosedur Tatatertib TNB Edisi Ke-6 dan juga buku Kod Etika TNB. Berdasarkan konsep ‘Learning by Doing’, peserta akan diberi kajian kes untuk diselesaikan bagi memantapkan kefahaman. Di samping itu,  peserta  juga  akan  didedahkan  kepada  simulasi  kes  dan  video-video  berkaitan  untuk memperkukuhkan lagi pembelajaran.
Objective:
Di  akhir  kursus, pelatih  boleh  menganalisa  situasi  salah  laku  atau perlanggaran  kontrak  perkhidmatan  dan  mengambil  tindakan  yang betul merujuk kepada Prosedur Tatatertib TNB dan Kod Etika TNB.


untuk maklumat lanjut sila hubungi:

1. NAMA: Jessica Retnasamy
   Email: jessica@tnb.com.my

2. NAMA: Hanifah Mohd Hussain
   Email: hanifahmh@tnb.com.my

Target Participant: Penyelia
Duration: 3 Days
Language:

RM 3.6K
Proses & Prosedur Perolehan
OSHE

2 Days

View Details

Overview:

Kursus ini adalah dirangka bagi memberikan pendedahan kepada anggota berkenaan Proses & Prosedur Perolehan berdasarkan Dokumen Dasar dan Prosedur Perolehan TNB. Dokumen ini telah digubal bagi menyempurnakan proses perolehan TNB dalam menjayakan inisiatif transformasi Syarikat Berkaitan Kerajaan. Dokumen ini juga menyediakan satu garispanduan umum bagi perolehan Pembekalan, Kerja dan Perkhidmatan menerusi satu sistem perolehan yang konsisten di seluruh Bahagian dan Anak Syarikat TNB. 

Ini akan membantu anggota kerja yang berkaitan dalam mempraktikkan tatacara yang betul dalam proses dan prosedur perolehan TNB.


Objective:

Di akhir kursus, para peserta akan dapat:

• Menjelaskan Proses Perolehan
• Menyenaraikan peranan jawatankuasa
• Melaksanakan tatacara Perolehan di tempat kerja dengan betul


untuk maklumat lanjut sila hubungi:

1. NAME: ISMAH BINTI SALLEH
   Email: ismahs@tnb.com.my



Target Participant: PP09 Clerical & TT13
Duration: 2 Days
Language:

RM 3.6K
Prosidur dan Arahan Kerja Keselamatan
OSHE

2 Days

View Details

Overview:
<div justify;"="">• Pengenalan Arahan Keselamatan
• Arahan kerja keselamatan dalam industri kawalan keselamatan
• Tanggungjawab pengawal dalam prosidur dan arahan kerja
• Sistem Tugasan
• Jenis Ancaman Keselamatan
• Langkah-langkah pencegahan
• Prosidur perkhidmatan pengawal
• Penempatan dan kawalan Pengawal
Objective:

• Memperolehi pengetahuan asas mengenai prosedur dan teknik-teknik arahan keselamatan
• Meningkatkan sikap tanggungjawab individu dan senantiasa berwaspada dalam melaksanakan tugas
• Mengaplikasikan pengetahuan yang diterima dalam menjalankan tugas-tugas dengan berkesan

 



Target Participant: Pembantu Keselamatan Tingkatan Kanan 'B' (PK05)
Duration: 2 Days
Language:

RM 3.6K
PUSPAKOM Inspection (Combo D)
OSHE

2 Days

View Details

Overview:

• Persediaan sebelum pemeriksaan PUSPAKOM
a. Kerangka – Chassis
b. Sistem enjin petrol dan diesel
c. Sistem penyejukan
d. Sistem pelinciran
e. Sistem elektrik dan elektronik
f. Sistem bateri dan cas
g. Differential unit
h. Steering geometry
i. Sistem brek

• Lawatan tapak dan penerangan oleh pihak PUSPAKOM

• Safety briefing

• Prosidur dan dokumentasi pemeriksaan PUSPAKOM

• Lawatan tapak

 


Objective:
Di akhir kursus, para peserta akan dapat:

• Menerangkan kenderaan yang digunakan dalam keadaan berada di dalam keadaan selamat
• Menerangkan tentang keselamatan pemandu
• Mempamerkan sikap yang betul sebagai seorang penyelia kenderaan
• Menerangkan mengenai prosidur dan dokumentasi pemeriksaan PUSPAKOM
• Mengendalikan prosidur dan dokumentasi untuk pemeriksaan PUSPAKOM


Target Participant: Pemandu (TD06 & TD08)
Duration: 2 Days
Language:

RM 3.6K
QMS Intenal Quality Audit Advance - ISO 9001:2008
OSHE

2 Days

View Details

Overview:
Learning the benefits and limitations of auditing internal systems for conformity only how to audit internal processes for conformance, effectiveness and efficiency about processes and how to analyze them in preparing for audit to audit processes and their interaction with other processes to report findings accurately and factually in terms that are valued by management to evaluate corrective actions effectively to eliminate causes of problems.
Objective:

At the end of this course, participants will be able to:

• Understand the new ISO 9001:2008 requirements and skills needed for the implementation
• Understand the requirements of ISO 19011:2002 auditing standards
• Have direct skills to manage and conduct the internal audit in a systematic and effective way
• Strengthen the management of audit system


for any enquiries please contact:

1. NAME: HARENAWATI HARON
   Email: harenawati@tnb.com.my

2. NAME: SURINDER KAUR
   Email: surinder@tnb.com.my

Target Participant: Qualified internal Quality Auditors & Nominated Employee
Duration: 2 Days
Language:

RM 3.6K
QMS ISO 9001:2008 - PSI-ISO Documentation Writing…
OSHE

3 Days

View Details

Overview:

QMS ISO 9001:2008 document requirement stated in clause 4 Control of Documents. It requires an organization to establish document, implement, and maintain a quality management system and continually improve its effectiveness.

QMS documentation shall include quality policy and quality objectives, quality manual, documented procedures, documents needed.

By the organization to ensure the effective planning, operation and control of its processes, and records.

QMS documentation may differ from one organization to another due to the size of organization and type of activities, the complexity of processes and their interactions, and the competence of personnel.


Objective:

At the end of this course, participants will be able to write ISO documents based on QMS ISO 9001:2008 requirements and TNB business process successfully.

• Able to interpret ISO clauses
• Able to state roles of PSI Team
• Able to write ISO documents procedure successfully


for any enquiries please contact:

1. NAME: HARENAWATI HARON
   Email: harenawati@tnb.com.my

2. NAME: SURINDER KAUR
   Email: surinder@tnb.com.my
 



Target Participant: Auditors & Nominated Employee
Duration: 3 Days
Language:

RM 3.6K
Quality Kualiti e.g 5's & WIT (Combo E)
OSHE

1

View Details

Overview:

Objective:


Target Participant: TD07
Duration: 1
Language:

RM 3.6K
Risikan Lanjutan
OSHE

3 Days

View Details

Overview:

Risikan adalah satu proses penyelidikan atau penelitian yang dilakukan dengan sembunyi-sembunyi. Ia juga boleh di definasi kan sebagai tatacara mendapatkan keterangan yang diperoleh secara rahsia.

Tujuan risikan adalah :
• Mendapatkan apa-apa maklumat yang berguna dari aspek keselamatan.
• Mengambil tindakan awal (menghalang) terhadap perkara yang boleh menggugat keselamatan.
• Mendapatkan maklumat awal mengenai sesuatu kegiatan / aktiviti yang akan dianjurkan dan menilai tahap keselamatanya.
• Membuat intipan pada lokasi-lokasi tertentu yang mencurigakan dari aspek keselamatan.
• Membuat pemeriksaan berkala di tempat-tempat yang boleh memberikan risiko keselamatan.

 


Objective:

Diakhir kursus, para peserta akan dapat:

• Memperolehi pengetahuan asas mengenai prosedur dan teknik-teknik risikan
• Mengaplikasikan pengetahuan yang diterima dalam menjalankan tugas-tugas risikan dengan berkesan
• Memahami teknik membuat laporan dalam tugasan

 



Target Participant: Pembantu Keselamatan Tingkatan Biasa 'B' (PK07)
Duration: 3 Days
Language:

RM 3.6K
Road Accident Management And Investigation
OSHE

2

View Details

Overview:

Objective:


Target Participant: E07-E17
Duration: 2
Language:

RM 3.6K
Road Safety Management Essentials
OSHE

1 Day

View Details

Overview:

This program aims at providing understanding of the principles Of Road Safety Management Essentials. The topics include:

1. Introduction to Malaysian Government Road Safety Aspiration.

2. Critical Element In Road Transport Act (ACT 333), Highway Code and Road Transport Rules.

3. Logistic Elements:
• Driver Management
• Journey Management
• Vehicle Management
• Load Management

4. Understanding Vehicle, Maintenance and Common Fault.

5. Health and Safety issues, creating an accident free culture.
 


Objective:
The course aims to equip participants with basic skills and knowledge required to implement their duty safely and effectively in a logistics management environment.


Target Participant: All Executive
Duration: 1 Day
Language:

RM 3.6K
Road Transport Fleet Safety Management
OSHE

3 Days

View Details

Overview:

Road safety is a measure put in place to help drivers on the road from causing unnecessary accidents. This framework also put in place to help drivers observe rules on the road and to prevent them from being involved in an accident on the road.

This program aims at providing understanding of the principles Of Road Transport Fleet Safety Management.

Objective:
The course aims to equip participants who are already in the logistic work environment with skills and knowledge required to implement their duty safely and effectively in a logistics management environment.


Target Participant: All Executive
Duration: 3 Days
Language:

RM 3.6K
Safety (OSHA) (Combo C)
OSHE

2

View Details

Overview:

Objective:


Target Participant: TD04
Duration: 2
Language:

RM 3.6K
Safety (SEMS) (Combo D)
OSHE

1

View Details

Overview:

Objective:


Target Participant: TD05 & TD06
Duration: 1
Language:

RM 3.6K
Safety and Health Committee
OSHE

2

View Details

Overview:

Objective:


Target Participant: OPEN
Duration: 2
Language:

RM 3.6K
Safety in the Use of Chemicals
OSHE

2

View Details

Overview:

Objective:


Target Participant: OPEN
Duration: 2
Language:

RM 3.6K
Safety Temporary Traffic Control (Management)
OSHE

2 Days

View Details

Overview:
The aims of the course is to equip and assess participants skills and knowledge in implementing safe systems of work for conducting temporary traffic control while working on road or roadway in order to secure the safety of workers and road users.
 
It provides a legislative basis for ensuring the safety of workers and road users during construction or maintenance work affecting roads traffic. Its intention is to clarify the relevant provisions in order to ensure that in respect of construction roadwork’s adequate guarding and lighting is provided, and traffic signs are placed and maintained, and where necessary operated, as far as practicable for the safe guidance or direction of persons, having regard, in particular, to the needs of people with disabilities.

No one set of signs or other traffic control devices can typically satisfy all conditions for a given task. At the same time, defining detailed standards that would be adequate to cover all applications is simply not practical. Traffic control plans and devices used, may be adopted by the authority of a public body or official having jurisdiction for guiding traffic. The plans and devices should follow the principles that will be taught in this program but may deviate from the typical drawings to allow for conditions and requirements of a particular site or jurisdiction.  

The criteria of this course are intended to apply to five categories of roads (Jabatan Kerja Raya Malaysia, Identifying, Prioritizing And Treating Hazardous Locations On Roads In Malaysia, 1995):
1. Expressway (Toll) 2. Federal 3. State 4. Urban 5. Other (District Council or Private)
Objective:
A trainee successfully completing this course will be able:

1. To identify an environmental or physical hazard at the road side.
2. To have adequate information on the legislative and regulation for ensuring the safety of workers and road users during construction.
3. To have adequate knowledge on the requirement of safety signage’s and safety notices during construction at the road side.


for any enquiries please contact:

1. NAME: ZAHAR JAFRI
   Email: zaharj@tnb.com.my

Target Participant: Managers, Engineers, Safety Coordinator, Senior Technician, Fitter & Driver
Duration: 2 Days
Language:

RM 3.6K
SEMS - Safety Representative Course
OSHE

3 Days

View Details

Overview:
This model course aims to provide the training for TNB Safety Representatives with adequate knowledge understanding of acts and regulations governing safety and operations at work place and proficiency in Safety Excellence Management System (SEMS), This course consists  covers on OSHA and the all elements of categories I, Categories II and categories III   in Safety Excellence Management system.

This course also cover the responsibilities of a Safety Representative are to assist the proprietor and any Safety and Health Officers/Safety Coordinator in promoting the safety and health of persons employed.

Though no formal examination is prescribed, each trainee’s progress will be closely monitored throughout the course and theoretical competence will be assessed based on trainees being able to answer objective questionnaire as provided. Practical competence of trainee will be evaluated based on trainee being able to successfully demonstrate carrying out the task given to them.

On successfully completion of the course the trainees will receive a certificate of attendance and subsequently be appointed as Safety Representatives and met the standard of competence as specified in SEMS Data Sheets.
Objective:
A trainee successfully completing this course will be able:

1. Can clearly understand the role and function as a Safety Reps.
2. To have adequate knowledge on relevant OSH&E  legislations.
3. To identify hazard & risk at workplace base on SEMS element.
4. Can perform correct inspection based on the SEMS checklist provided.
5. Make a report on the identified hazard in the workplace.
 

for any enquiries please contact:

1. NAME: ZAHAR JAFRI
   Email: zaharj@tnb.com.my

Target Participant: Safety Coordinator, Safety Inspector, Technician, Clerks & Fitter
Duration: 3 Days
Language:

RM 3.6K
SEMS Auditor Accredited Course
OSHE

5 Days

View Details

Overview:
This model course aims to provide the training for TNB SEMS Auditors with adequate knowledge understanding of legislations and regulations governing safety and operations at work place and proficiency in Safety Excellence Management System (SEMS), This course consists of two modules which is module I covers on OSHA and the all elements of Category I, Category II, Category III, Category IV and Category V in Safety Excellence Management System.

Though no formal examination is prescribed, each trainee’s progress will be closely monitored throughout the course and theoretical competence will be assessed based on trainees being able to answer objective questionnaire as provided. Practical competence of trainee will be evaluated based on trainee being able to successfully demonstrate carrying out the task given to them.

On successfully completion of the course the participants is advices to join the SEMS annual audit to complete Accredited Auditor course.  Accredited Auditor Certificate will be issued certifying that the holder has attended the course and participate the annual SEMS audit and met the standard of competence as specified in SEMS Data Sheets.
 
Objective:
A trainee successfully completing this course will be able:

1. To have adequate knowledge on relevant OSH&E legislations and regulation
2. To have adequate knowledge on OSH organization
3. To understand audit methodology and ethics
4. To provide a proper audit report with respect to the facts obtained
5. Can be performed in a correct manner and confident during the closing meeting
6. To identify  hazard & risk at workplace based on SEMS element


for any enquiries please contact:

1. NAME: ZAHAR JAFRI
   Email: zaharj@tnb.com.my

Target Participant: Managers, Engineers, Safety Coordinator & Senior Technician
Duration: 5 Days
Language:

RM 3.6K
SEMS Auditor Accredited Course (Module I)
OSHE

3 Days

View Details

Overview:
This model course aims to provide the training for TNB SEMS Auditors with adequate knowledge understanding of legislations and regulations governing safety and operations at work place and proficiency in   Safety Excellence Management System (SEMS), This course consists of two modules which is module I covers on OSHA and the all elements of Category I, Category II, Category III and Category IV in Safety Excellence Management System.

Though no formal examination is prescribed, each trainee’s progress will be closely monitored throughout the course and theoretical competence will be assessed based on trainees being able to answer objective questionnaire as provided. Practical competence of trainee will be evaluated based on trainee being able to successfully demonstrate carrying out the task given to them.

On successfully completion of the course in module I and Module II the participants is advices to join the SEMS annual audit to complete Accredited Auditor course.  Accredited Auditor Certificate will be issued certifying that the holder has attended the course and participate the annual SEMS audit and met the standard of competence as specified in SEMS Data Sheets.
Objective:
A trainee successfully completing this course will be able:

1. To have adequate knowledge on relevant OSH&E legislations and regulation
2. To identify hazard & risk at workplace based on SEMS element
3. To enable participants to attend the module II to obtain a certificate of accreditation as SEMS auditors


for any enquiries please contact:

1. NAME: ZAHAR JAFRI
   Email: zaharj@tnb.com.my

Target Participant: Managers, Engineers, Safety Coordinator & Senior Technician
Duration: 3 Days
Language:

RM 3.6K
SEMS Auditor Accredited Course (Module II)
OSHE

3 Days

View Details

Overview:
This course is a continuation of the course Safety Excellence Management System (SEMS) Auditor Module I. In this module II covers on OSH organization as stated in the all elements of categories V, Auditor methodology and Ethics , how to make a proper audit reports and prepare a presentation materials  to be presented at the closing meeting.

Though no formal examination is prescribed, each trainee’s progress will be closely monitored throughout the course and theoretical competence will be assessed based on trainees being able to answer objective questionnaire as provided. Practical competence of trainee will be evaluated based on trainee being able to successfully demonstrate carrying out the task given to them.

On successfully completion of course participants will receive a certificate of attendance of courses where participants have completed the attendance of both module. Participant will be advices to join the division SEMS annual audit to complete Accredited Auditor course. Accredited Auditor Certificate will be issued certifying that the holder has attended the course and participate the annual division SEMS audit and met the standard of competence as specified in SEMS Data Sheets.
Objective:
A trainee successfully completing this course will be able:

1. To have adequate knowledge on OSH organization
2. To understand audit methodology and ethics
3. To provide a proper audit report with respect to the facts obtained
4. Can be performed in a correct manner and confident during the closing meeting
5. To identify hazard & risk at workplace based on SEMS element


for any enquiries please contact:

1. NAME: ZAHAR JAFRI
   Email: zaharj@tnb.com.my

Target Participant: Managers, Engineers, Safety Coordinator & Senior Technician
Duration: 3 Days
Language:

RM 3.6K
Senjata Api
OSHE

3 Days

View Details

Overview:

• Pengenalan asas senjata
• Penggunaan senjata api dalam industri dan akta terlibat
• Pengendalian senjata api
• Akta Senjatapi 1960
• Undang-undang senjatapi
• Perintah Tetap Ketua Polis Negara- Kaedah Penggunaan Senjatapi D222
• Prinsip Dan Terminologi senjatapi
• Mengenai rupa bentuk, sifat dan kelakuan senjatapi
• Langkah-langkah keselamatan penggunaan senjatapi
• Teknik dan langkah-langkah keselamatan semasa mencuci,menyimpan dan membawa senjatapi
• Teknik dan langkah keselamatan dilapang sasar

 


Objective:

Diakhir kursus, para peserta akan dapat:

• Meningkatkan tahap disiplin diri dan kerja berpasukan
• Memahami asas penggunaan senjata
• Memahami prosedur dan tugasan penggunaan senjata
• Berkebolehan dalam mengendalikan pelbagai jenis senjata dengan betul dan selamat
• Memahami Akta dan Undang-undang penggunaan senjata api dalam tugasan



Target Participant: Pembantu Keselamatan Tingkatan Biasa 'B' (PK03)
Duration: 3 Days
Language:

RM 3.6K
Siasatan Lanjutan
OSHE

3 Days

View Details

Overview:

Siasatan adalah satu proses bagi menentukan kebenaran bagi sesuatu laporan yang dibuat, menentukan jenis kesalahan, mendapatkan bukti serta keterangan, digunakan sebagai bukti pertuduhan, merangka pertuduhan, mengenal pasti saksi-saksi dan bertujuan untuk membuat panggilan saksi.

Objective:

Diakhir kursus, para peserta akan dapat:

• Memperolehi pengetahuan asas mengenai prosedur dan teknik-teknik siasatan
• Mengaplikasikan pengetahuan yang diterima dalam menjalankan tugas-tugas siasatan dengan berkesan
• Memahami teknik membuat laporan dalam tugasan

 



Target Participant: Pembantu Keselamatan Tingkatan Biasa 'B' (PK07)
Duration: 3 Days
Language:

RM 3.6K
Sistem Motivasi Prestasi Lanjutan
OSHE

2 Days

View Details

Overview:
Kursus ini dirangka khas untuk anggota kerja penyelia di TNB tentang Sistem Motivasi Prestasi.  Kursus ini merangkumi keseluruhan Rangka Kerja Outcome-Based KPI bermula dari aspek Halatuju dan Aspirasi Syarikat / Bahagian sehingga penyelarasan strategi di peringkat Jabatan / Unit.  Para peserta akan diberi latihan praktikal untuk menyediakan KPI berdasarkan C.E.O dan Outcome Based KPI.
Objective:

Berpandukan kepada pekeliling Pengurusan Sumber Manusia tentang Sistem Motivasi Prestasi yang digunapakai di TNB, peserta boleh:

i. Menerangkan halatuju Syarikat
ii. Mengenalpasti dan menerangkan konsep C.E.O.
iii. Menyatakan Bidang Keberhasilan Utama (KRA) TNB
iv. Membezakan di antara KPI berdasarkan aktiviti dan KPI berdasarkan penghasilan (Outcome Based KPI)
v. Menerangkan kategori-kategori kompetensi yang digunapakai
vi. Menyatakan proses-proses dalam kitaran PMS

Dengan betul


untuk maklumat lanjut sila hubungi:

1. NAMA: Jessica Retnasamy
   Email: jessica@tnb.com.my

2. NAMA: Hanifah Mohd Hussain
   Email: hanifahmh@tnb.com.my
 



Target Participant: Terbuka & Mandatori PP09
Duration: 2 Days
Language:

RM 3.6K
Site Safety Supervisor
OSHE

10 Days

View Details

Overview:

Under the Factories & Machinery (Building Operations and Works of Engineering Construction) (Safety) Regulations 1986; for any building operation and works of engineering construction projects:
1. Main contractors are required to employ competent SSS for safety supervision within the work site.
2. Sub-contractors must employ competent Contractor’s Safety Supervisor at the place of work to keep each project safe, yet be cost effective and efficient.

The Department of Occupational Safety & Health (DOSH) has fully enforced the above-mentioned regulations since January 2012. In order to fulfill the requirements and at the same time to resolve the high demand and serious shortage of Site Safety & Health Supervisors (SSS) in the construction industry, with the blessing of DOSH, MBAM is taking a pro-active step in helping the Government to overcome the above issue by conducting the SSS training course specially tailored for the construction industry. This SSS Course is accredited and recognized by DOSH.


Objective:
At the end of the course, the participant will be able to:

•Describe the OSH legislative requirements pertaining to construction site
•Conduct the risk management at the workplace
•Elaborate OSH requirements for site management
•Be a competent Site Safety Supervisor (SSS)


Target Participant: Site Foreman / Supervisor & Safety Supervisor
Duration: 10 Days
Language:

RM 3.6K
Stress Management
OSHE

2 Days

View Details

Overview:
Stress affects individuals from all walks of life, but has even greater effects within high-density populations like Singapore. Although some types of stress are actually motivating, too much stress can critically affect your physical, emotional and mental well-being.

This two day course will teach you how to identify the causes of stress, the symptoms of stress, how to manage stressful situations, how to maximize positive stress, how to apply routines to your life and practice relaxation techniques when feeling stress and much more.
 
Objective:
At the end of the course, participants will be able to:

• Describe the concept of stress and the sources of stress
• Manage stress through lifestyle management
• Identify  the impact of stress on work life and family
• Learn the various methods to achieve work life balance


for any enquiries please contact:

1. NAME: SURINDER KAUR A/P KULDIP SINGH
   Email: surinder@tnb.com.my
 
2. NAME: SITI AISHAH ABDULLAH 
   Email: sitiaishah.abdullah@tnb.com.my
 

Target Participant: TNB Non-Executives
Duration: 2 Days
Language:

RM 3.6K
Super Bike - Motosikal Berkuasa Tinggi (Pengenalan…
OSHE

3

View Details

Overview:

Objective:


Target Participant: Open
Duration: 3
Language:

Human Resource Minister - Training Provider Award 2007
Role Model Company 2013 for Electrical Training Programmes by Manpower Department (JTM)
Energy Industry Award: Training Institution Excellence 2011

TNB Integrated Learning Solution Sdn Bhd - ILSAS
Jalan IKRAM-UNITEN, Karung Berkunci 205,
43650 Bandar Baru Bangi, Selangor, MALAYSIA

T: (+6) 03-8922 7222 F: (+6) 03-8926 4437 E: infoilsas@tnb.com.my

© 2017 TNB ILSAS